Free 173 Best Homemade Tools eBook:  
Remove advertisements
Results 1 to 2 of 2

Thread: [Woodturning] Polishing arbor

  1. #1
    Christophe Mineau's Avatar
    Join Date
    Jul 2014
    France, Brittany !
    Thanked 1,102 Times in 396 Posts

    Christophe Mineau's Tools

    [Woodturning] Polishing arbor

    Here is another example of tool made with the M33 nut.
    This time, no need for metal lathe.
    It is a spindle that supports the polishing wheel I use for Canauba waxing my finished pieces.
    Previously, it was mounted on my chuck, but after a lot of use, the chuck deep marks in the wood made it quite off-center. Now it is preferable to get it independent from the chuck.

    I think the pictures are self explanatory :

    Cheers !
    Visit my Website :
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  2. The Following 4 Users Say Thank You to Christophe Mineau For This Useful Post:

    DIYer (03-30-2016), Jon (03-29-2016), kbalch (03-29-2016), PJs (03-29-2016)

  3. #2
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Thanked 765 Times in 700 Posts

    Thanks Christophe Mineau! We've added your Polishing Arbor to our Woodworking category,
    as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:

    Post your reply!
    Join 33,912 of us and get our 173 Must Read Homemade Tools eBook free.

    173 Must Read Homemade Tools

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts