Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 7 of 7

Thread: [Woodwind instrument making] Ball post drilling fixture

  1. #1
    Supporting Member Christophe Mineau's Avatar
    Join Date
    Jul 2014
    Location
    France, Brittany !
    Posts
    913
    Thanks
    825
    Thanked 1,687 Times in 481 Posts

    Christophe Mineau's Tools

    [Woodwind instrument making] Ball post drilling fixture

    Hi,

    I recently showed a tool designed for turning small balls. It is explained here :
    http://www.homemadetools.net/forum/m...946#post109053

    This tool is especially useful for turning ball posts, which are the small pivots used to support the rod of a key on a woodwind musical instrument.

    Here is a batch of nickel silver ball post blanks : (they are quite small, the ball is 4.5 mm in diameter.)


    For supporting the rod, which is actually a long 2mm diameter screw, one ball must be drilled through, 2mm diameter, and the other ball must be tapped M2, so drilled 1.5mm.
    It is quite challenging drilling such small holes through a ball shaped piece, and it is quite critical to keep well centered.

    So I imagined this little fixture for that purpose, which turns out to be very effective.
    Here are all the parts:
    - a main body (out of hex stock)
    - Two small screws, center drilled, and with a conical tip. They will act as drilling bushings to guide the drill bit.
    - A tapped transversal support, that will hold the ball post while being drilled.



    Here you can see how the ball post is hold in place inside the fixture.
    The two screws will guide the drill bit. One is center drilled at 2mm, and the other at 1.5 mm, so the same fixture can be used for the two different sizes required, you just have to revert it upside down.


    Everything assembled, ready for drilling.


    one drop of oil


    And here we go


    What we obtain :


    Perfectly true :


    I can show here an example of what the finished key looks like (on my last instrument) :

    186 More Best Homemade Tools eBook
    Last edited by Christophe Mineau; May 4, 2018 at 04:04 PM.
    Cheers !
    Christophe
    ________________________________________________________________
    Visit my Website : http://www.labellenote.fr/
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  2. The Following 17 Users Say Thank You to Christophe Mineau For This Useful Post:

    baja (Jan 18, 2023), bgerens (May 5, 2018), DIYer (May 5, 2018), Home-PC (Dec 10, 2020), JoeH (Dec 27, 2018), Jon (May 5, 2018), Miloslav (Dec 26, 2018), mklotz (Dec 27, 2018), NortonDommi (May 7, 2018), phred (Jan 18, 2023), PJs (May 7, 2018), richardcrane (May 5, 2018), rossbotics (May 5, 2018), Seedtick (May 6, 2018), Sleykin (Jan 17, 2023), that_other_guy (Jan 7, 2019), Tonyg (Dec 11, 2020)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks Christophe Mineau! We've added your Ball Post Drilling Fixture to our Luthiery category,
    as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:




    2000 Tool Plans

  4. The Following User Says Thank You to DIYer For This Useful Post:

    phred (Jan 18, 2023)

  5. #3
    Supporting Member rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    730
    Thanks
    1,019
    Thanked 1,639 Times in 402 Posts

    rossbotics's Tools
    Beautiful work Christophe

    Doug
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber



    Tool Plans for Sale by rossbotics






  6. #4
    Supporting Member ncollar's Avatar
    Join Date
    Oct 2012
    Posts
    354
    Thanks
    23
    Thanked 180 Times in 126 Posts
    Christophe
    Beautiful work, I'd like to see a little bit more of how it is done.
    Very nice work
    Nelson

  7. #5
    Supporting Member Ralphxyz's Avatar
    Join Date
    Dec 2016
    Posts
    1,564
    Thanks
    2,378
    Thanked 279 Times in 228 Posts

    Ralphxyz's Tools
    WOW, once again Thank You,

    Ralph

  8. #6
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,434
    Thanks
    357
    Thanked 6,379 Times in 2,117 Posts

    mklotz's Tools
    I had a somewhat similar problem. In my case, I needed to drill two orthogonal holes through 1/8" diameter brass balls used as part of miniature universals. The jig and procedure is described here...

    http://www.homemadetools.net/forum/d...-spheres-27292

    Drilling larger holes in larger spheres involves a different approach...

    http://www.homemadetools.net/forum/d...-spheres-27291
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  9. #7
    JoeH's Avatar
    Join Date
    Mar 2018
    Posts
    57
    Thanks
    37
    Thanked 25 Times in 21 Posts
    beautiful work, Christophe.



    186 More Best Homemade Tools eBook

  10. The Following User Says Thank You to JoeH For This Useful Post:

    Christophe Mineau (Dec 28, 2018)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •