Printable View
Hi,
I needed a bracket to hold a dial indicator in my lathe tool post, and I realized I could probably have for the same price a tool to check the squareness of the work-piece for my milling head.
I just had to go with a round shank, and use a boring bar holder in the lathe tool post.
http://www.labellenote.fr/file/homem...acket_0001.jpg
Used in the lathe tool post :
http://www.labellenote.fr/file/homem...acket_0002.jpg
Used in the mill:
http://www.labellenote.fr/file/homem...acket_0003.jpg
just bumping this in front of the spamed posts
Man that is the cleanest lathe area i v ever seen.
you got that right Capt.
That's not the first time I am said that here. I'm not sure how I have to take it ...
Didn't your mother teach you to clean up your bedroom everyday ?
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Christophe Mineau! We've added your Dial Indicator Holder to our Measuring and Marking category,
as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-dial-indicator-holder-16"> <img src="/uploads/214051/homemade-dial-indicator-holder-16.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-dial-indicator-holder-16">Dial Indicator Holder</a> <span> by <a href="http://www.homemadetools.net/builder/Christophe+Mineau">Christophe Mineau</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/dial-indicator'>dial indicator</a>, <a href='http://www.homemadetools.net/tag/holder'>holder</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
O We just like to tease you cause we like you so much Christophe.