Adding a comalong to an engine crane.

[chief36chevy]

My crane did not give me the range I needed to lower my cab all the way down. I added a comalong and a couple of pullys to the crane to get more range of motion to let the cab all the way down. I added a ½” boltsto the last adjustment hole and attached the comalong there. I used another longer ½” bolt to the hook end. I ran this bolt through two pullys and the chrane’s hook. I then strung the comalong’s cable through the pullys and back to itself.

[kbalch]

Thanks chief36chevy! I've added your Engine Crane Come-Along to our Automotive and Jacks and Lifts categories, as well as to your builder page: chief36chevy's Homemade Tools. Your receipt:

Engine Crane Come-Along by chief36chevy

tags: engine, crane, pulley