Rust removal from some large drill bits and Shop Dog Zeke finally gets one of them darn Moles
https://www.youtube.com/watch?v=R7nh9_FY284
Printable View
Rust removal from some large drill bits and Shop Dog Zeke finally gets one of them darn Moles
https://www.youtube.com/watch?v=R7nh9_FY284
Thanks bstanga! We've added your Electrolysis Setup to our Cleaning category, as well as to your builder page: bstanga's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/electrolysis-setup-3"><img src="https://www.homemadetools.net/uploads/237694/homemade-electrolysis-setup-3.jpeg" /></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/electrolysis-setup-3">Electrolysis Setup</a> <span> by <a href="/builder/bstanga">bstanga</a></span> </div> <div class="tags">tags: <a href="http://www.homemadetools.net/tag/charger">charger</a>, <a href="http://www.homemadetools.net/tag/cleaner">cleaner</a></div> </div> </div> </div>
I build similar some years ago.
To handle longer workpieces I used a rectangular flower pot.
One should pay attention to the gasses produced.
Plain water (H2O) would give an HHO gas, which is extremely flammable/explosive.
I don't know what will be produced with soda in there....?
Under no circumstances should salt be used as NaCL would dissolve in the water and produce chlorine during the electrolysis..!
Together with the hydrogen produced on the anode, hydrochloric acid is formed...which is really bad for the health.
So be aware of what electrolyte you put in there, not everything is suitable for the process.