-
Auto feed tapping stand
The special feature of this tapping stand is that it feeds the tap automatically at the pitch of the thread being made. This therefore, avoids the need to use a taper tap and a good thread is achieved from the first turn, especially beneficial when tapping holes in thin components.
The auto feed mechanism can also be used when tapping on the lathe.
https://www.youtube.com/watch?v=SHsbBZywDpM
Also, the page on my website for this tapping stand can be found here
Harold Hall
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Metaler! We've added your Auto Feed Tapping Stand to our Tapping and Threading category,
as well as to your builder page: Metaler's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/homemade-auto-feed-tapping-stand">
<img src="/uploads/159189/homemade-auto-feed-tapping-stand.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/homemade-auto-feed-tapping-stand">Auto Feed Tapping Stand</a>
<span> by <a href="http://www.homemadetools.net/builder/Metaler">Metaler</a></span>
</div>
<div class="tags">tags:
<a href='http://www.homemadetools.net/tag/tapping'>tapping</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
Thats the next project on my to do list
after I finish building Harolds advanced design dividing head