Free 173 Best Homemade Tools eBook:  
Remove advertisements
Results 1 to 9 of 9

Thread: Brass Hammer 20 ounce

  1. #1
    jjr2001's Avatar
    Join Date
    Jun 2016
    Posts
    636
    Thanks
    845
    Thanked 1,109 Times in 395 Posts

    jjr2001's Tools

    Brass Hammer 20 ounce

    While I was making the replaceable face hammer I decided to make a larger brass one.
    Weighting in at 20 ounces (head only) the entire hammer is made of brass.
    Head is 3 3/8" long and 1.250" in diameter and threaded 1/2-13.
    The handle is 10 1/4" long including the end cap and 3/4" in diameter.
    End cap is threaded 1/2-13 so the handle has room for whatever.

    At 20 ounces it can "bump" hard if needed.

    Cheers, JR
    Attached Thumbnails Attached Thumbnails Brass Hammer  20 ounce-img_1493b-copy.jpg  

  2. The Following 7 Users Say Thank You to jjr2001 For This Useful Post:

    Captainleeward (01-23-2018), Jon (01-18-2018), MountainMan (09-28-2018), PJs (01-19-2018), rossbotics (01-18-2018), Saxon Violence (05-25-2018), Seedtick (01-18-2018)

  3. #2
    Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,132
    Thanks
    4,849
    Thanked 1,213 Times in 597 Posts

    Paul Jones's Tools
    JR,

    You put a beautiful finish on the contour part of your hammer, good looking knurling and I also like the handle storage idea.

    Regards,

    Paul

  4. The Following User Says Thank You to Paul Jones For This Useful Post:

    jjr2001 (01-18-2018)

  5. #3
    rossbotics rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    532
    Thanks
    664
    Thanked 985 Times in 273 Posts

    rossbotics's Tools
    Looks great
    Comments are always welcome
    Doug



    Tool Plans for Sale by rossbotics




  6. The Following User Says Thank You to rossbotics For This Useful Post:

    jjr2001 (01-18-2018)

  7. #4
    jjr2001's Avatar
    Join Date
    Jun 2016
    Posts
    636
    Thanks
    845
    Thanked 1,109 Times in 395 Posts

    jjr2001's Tools
    Thanks Guys, Brass is so much fun to turn!

    Cheers, JR

  8. The Following 2 Users Say Thank You to jjr2001 For This Useful Post:

    Paul Jones (01-18-2018), PJs (01-19-2018)

  9. #5
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,087
    Thanks
    337
    Thanked 655 Times in 595 Posts


    Thanks jjr2001! We've added your Hammer to our Hammers category,
    as well as to your builder page: jjr2001's Homemade Tools. Your receipt:




  10. The Following User Says Thank You to DIYer For This Useful Post:

    jjr2001 (01-19-2018)

  11. #6
    Captainleeward's Avatar
    Join Date
    Jul 2014
    Location
    San DIEGO, California
    Posts
    965
    Thanks
    414
    Thanked 1,020 Times in 461 Posts

    Captainleeward's Tools
    The first one is the best for me....

  12. #7
    jjr2001's Avatar
    Join Date
    Jun 2016
    Posts
    636
    Thanks
    845
    Thanked 1,109 Times in 395 Posts

    jjr2001's Tools
    Yep, that is kinda a speciality hammer that can do it all.
    The other two are just "shop tools"

    Cheers, JR

  13. #8
    Captainleeward's Avatar
    Join Date
    Jul 2014
    Location
    San DIEGO, California
    Posts
    965
    Thanks
    414
    Thanked 1,020 Times in 461 Posts

    Captainleeward's Tools
    How did you get all those knurls so evenly spaced?

  14. The Following User Says Thank You to Captainleeward For This Useful Post:

    jjr2001 (05-25-2018)

  15. #9
    jjr2001's Avatar
    Join Date
    Jun 2016
    Posts
    636
    Thanks
    845
    Thanked 1,109 Times in 395 Posts

    jjr2001's Tools
    Hello Captain, I just knurled the entire length and then using a parting tool and my shop made DRO for the lathe,
    stepped off equal distances for the shallow cut.

    Cheers, JR


    Post your reply!
    Join 33,912 of us and get our 173 Must Read Homemade Tools eBook free.



    173 Must Read Homemade Tools

  16. The Following 2 Users Say Thank You to jjr2001 For This Useful Post:

    Paul Jones (05-26-2018), PJs (05-28-2018)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •