Chassis Jig Spindle Fixtures

Setting up new chassis' on the jig tables required being able to hold the brake rotor and spindle at ride height on the tables.
I built these fixtures so the rotors can simply bolt into them.
http://images15.fotki.com/v1631/phot...xtures1-vi.jpg
These then bolt to angle plates mounted on the jig table. Ride height is set by setting the spindle Centerline at the Static Load Radius of the tire being designed around.
http://images56.fotki.com/v362/photo...xtures2-vi.jpg
They stay out of the way while working on suspension stuff on the other side.
Mark

Very clever; well done! :hattip:

Ken

Thanks astroracer! We've added your Chassis Jig Spindle Fixture to our Automotive category, as well as to your builder page: astroracer's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/chassis-jig-spindle-fixture"><img src="https://www.homemadetools.net/uploads/236883/homemade-chassis-jig-spindle-fixture.jpeg" /></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/chassis-jig-spindle-fixture">Chassis Jig Spindle Fixture</a> <span> by <a href="/builder/astroracer_2">astroracer</a></span> </div> <div class="tags">tags: <a href="http://www.homemadetools.net/tag/alignment">alignment</a>, <a href="http://www.homemadetools.net/tag/chassis">chassis</a>, <a href="http://www.homemadetools.net/tag/spindle">spindle</a>, <a href="http://www.homemadetools.net/tag/fixture">fixture</a></div> </div> </div> </div>