-
Chip Carving Knife
Chip Carving Knife - by Rick M. @ LumberJocks.com ~ woodworking community
http://i.imgur.com/MCqfFTCl.jpg
Mahogany handle shaped mostly by hand. Red mahogany stain, blonde shellac, then buffed with 0000 steel wool and wax. Donor for the metal was a Dewalt reciprocating blade. Shape cut with a Dremel. The edge was hand ground then sharpened with a diamond file and sandpaper. Blade was polished to 2000 grit. The front half is scalpel sharp, the back needs a little more sharpening.
http://i.imgur.com/KH1ZWidl.jpg
-
Thanks wormil! I've added your Chip Carving Knife to our Metalworking and Woodworking categories, as well as to your builder page: wormil's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="/chip-carving-knife"><img src="/uploads/64548/chip-carving-knife.jpeg" alt="Chip Carving Knife" /></a> </div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="/chip-carving-knife">Chip Carving Knife</a> <span> by <a href="/builder/wormil">wormil</a></span> </div>
<div class="tags">
tags:
<a href="/tag/hand-tools">hand tools</a>, <a href="/tag/knife">knife</a> </div>
</div>
</div>
</div>