Cold Bluing In The Home Workshop

Printable View

Jun 6, 2019, 05:52 AM
The Aussie Shed

Cold Bluing In The Home Workshop

Just Made a Quick Video on Cold Bluing In The Home Workshop.
This is What I do, may not be everyone's cup of Tea, but I find it quite successful on Various Bits n Pieces for a quick Hassell free Finish.
Hope you Like It. Cheers.
https://youtu.be/Y0s_GuEuWes
Jun 6, 2019, 10:53 AM
DIYSwede

Thanks for this tip, Mate!
I'm having quite a few tools in dire need for a bluing!
Regards!
Johan
Jun 6, 2019, 05:03 PM
Beserkleyboy

Thanks, mate. When I moved from the highlands to the coast, I learned a whole lot about what steels rust and what don't...Now I've got a way to stop that happening on HSS bits...Cheers!
Jim in Sunny Sth Coast NSW AUS
Jun 6, 2019, 05:31 PM
VinnieL

I use Brownell's Gunsmithing Supply's Cold blue. It seems to work a little better. I have touched-up several firearms with it.

Birchwood Casey also makes an Aluminum Blackening solution which works well on alloy pistol frames.

I use Acetone or Laquer Thinner to remove oil and grease before bluing. Also flashing a propane torch over the item to be coated just to warm it slightly also opens the pores of the steel and allows the bluing to penetrate better. Just let the solvent evaporate before heating it with the torch or course!!
Jun 6, 2019, 08:49 PM
Toolmaker51

re metal coloring in general;
One of, if not THE classic reference on the subject is the 1936 "Firearm Blueing & Browning – by R. H. Angier". If you go you know where, copies are pricey; $60-ish for 151 pages. But the info collected just isn't compiled so neatly elsewhere; the occasional hangup is on less than modern names for some chemicals. Cross references are available separately, and the web, of course.
Jun 7, 2019, 02:42 AM
Fluffle-Valve

Interesting. I've never tackled Blueing before, so it's time I gave it a go.
Is it just to look good or does it help stop/prevent rusting?
Jun 7, 2019, 06:15 AM
DIYSwede

Actually both -
1) as a nice, durable finish if its ground surface is absolutely clean, nice and scratch-free to begin with, and
2) as an oil-binding outer surface preventing rust.
The bluing isn't really that rust-preventive in itself.

Not really the way to go for cover-up of machining mistakes, scratches or rust-pitted vintage gear either.
Just my 2 cents and YMMV.
Jun 7, 2019, 07:27 AM
The Aussie Shed

Exactly Mr Swede, couldn't have put it better myself.
Cheers.
Jun 14, 2019, 03:10 PM
DIYer


Thanks The Aussie Shed! We've added your Cold Bluing Method to our Miscellaneous category,
as well as to your builder page: The Aussie Shed's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-cold-bluing-method"> <img src="/uploads/224393/homemade-cold-bluing-method.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-cold-bluing-method">Cold Bluing Method</a> <span> by <a href="http://www.homemadetools.net/builder/The+Aussie+Shed">The Aussie Shed</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/finish'>finish</a> </div> </div> </div> </div>