Printable View
Had to square up my new milling machine vice.Had a dial gauge I used to set the vernier pulleys for my race car, but no magnetic base.
So whipped out this little adapter that goes around a 8mm drill that goes into the chuck and then you can run the dial against a parallel clamped in the vice.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks garage nut! We've added your Dial Gauge Chuck Mount to our Measuring and Marking category,
as well as to your builder page: garage nut's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-dial-gauge-chuck-mount"> <img src="/uploads/205784/homemade-dial-gauge-chuck-mount.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-dial-gauge-chuck-mount">Dial Gauge Chuck Mount</a> <span> by <a href="http://www.homemadetools.net/builder/garage+nut">garage nut</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/dial-indicator'>dial indicator</a>, <a href='http://www.homemadetools.net/tag/adaptor'>adaptor</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->