Free 50 Best Homemade Tools eBook:  
Remove advertisements
Results 1 to 2 of 2

Thread: Electricians Jack Stands.

  1. #1

    Join Date
    Aug 2016
    Thanked 28 Times in 24 Posts

    Electricians Jack Stands.

    Electricians Jack Stands.-electricians-jack-stand-3.jpgElectricians Jack Stands.-electricians-jack-stand-2.jpgElectricians Jack Stands.-electricians-jack-stand-1.jpg

    Here a couple of pictures of some electrician style jack stands I made over the year. About half the materials are recycled tubing. I'm happy I got them to a usable state but I do need to build one with a leveling head. That will happen when I get 1000 other little projects done.

    The design is hardly my own, basically a copy of a designs I saw the electricians using at our plant. Of course my little rolls of wire would make them laugh. One thing I do have on the back burner is to make one of those wire reel hand truck type tools, or maybe an electrical work bench / wagon with built in storage. These came first because I have a bit of plumbing to do.

    If anybody is wondering welded up with flux core off my Lincoln Mig welder, the paint is rattle can Rustoleum and the steel a mix mash of scrap and drops. I actually think the cost of the rattle cans was higher than the purchased steel. I actually like the basic design here and have thought a bit about using the form for a grinder stand and supports for other light tools.

  2. The Following 2 Users Say Thank You to wizard69 For This Useful Post:

    bobs409 (07-17-2017), Seedtick (07-18-2017)

  3. #2
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Thanked 616 Times in 557 Posts

    Thanks wizard69! We've added your Electricians Jack Stands to our Dollies and Stands category,
    as well as to your builder page: wizard69's Homemade Tools. Your receipt:

    Post your reply!
    Join 33,912 of us and get our 50 Must Read Homemade Tools eBook free.

    50 Must Read Homemade Tools

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts