Faceplate Balancing Fixture

This video is for a device which enables faceplate assemblies to be balanced to a higher degree than is possible if attempted whilst the faceplate is situated on the lathe's spindle.

Another feature is that it enables workpieces, with clamps etc. , to be fixed and accurately positioned whilst the faceplate is horizontal. This making it very much easier to populate a faceplate compared to carrying out the task whilst on the lathe's spindle, where three, or more, hands are often needed for the task.

The design uses a simple method of producing the equivalent of ball races on which the spindle runs, avoiding the need to purchase large, and expensive, commercial ball races. Viewing the video just to see how these work may be of interest, even if the fixture itself has no place in your workshop.

The Video https://www.youtube.com/watch?v=gZv8c9AIq4U

A full list of my videos made public so far can be found on this page Harold Halls Videos, index

Harold Hall

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Metaler! We've added your Faceplate Balancing Fixture to our Machining category,
as well as to your builder page: Metaler's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-faceplate-balancing-fixture-2"> <img src="/uploads/162261/homemade-faceplate-balancing-fixture-2.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-faceplate-balancing-fixture-2">Faceplate Balancing Fixture</a> <span> by <a href="http://www.homemadetools.net/builder/Metaler">Metaler</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/fixture'>fixture</a>, <a href='http://www.homemadetools.net/tag/balancing'>balancing</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Excellent Mr. Hall; Dynamic balance is a subject many are completely unaware how to achieve/ counteract. Not only in weights alone, but volume, materials, location, and resulting centrifugal forces.
The physical size of a faceplate offers only a basic flywheel; even small items attribute out-of-balance conditions with greater distance from centerline.
Also why various lathe chucks have RPM limitations. Cast iron has internal imperfections, typical to low cost 3 and 4 jaw models, they don't invest additional work on.