This is my solution for finger joint jig,on router table
Last edited by connan; 01-11-2017 at 01:26 PM.
Thanks connan! We've added your Finger Joint Jig to our Woodworking category,
as well as to your builder page: connan's Homemade Tools. Your receipt:
Finger Joint Jig
jig, finger joint
There are currently 1 users browsing this thread. (0 members and 1 guests)
That would be my approach. If it is stuck then there is likely to be a reason that can't or shouldn't be fixed by external means.
BTW. where do you guys get all these stuck engines from?
I can't imagine dealing with pressures that high. It must have been very satisfying to tame it.
Thanks for the story and kind words,
Look at Eastwood co. they have a couple of different designs.
I really didn't have a need for another machinist jack but I did need something that I could use to mark a hole location
the hole is 41/64 ths and a 5/8 grade 8 bolt must be used so alignment is...
Thanks mattthemuppet! We've added your Oil Filter Wrench Modification to our Engine Oil category,
as well as to your builder page: mattthemuppet's Homemade Tools. Your receipt: