-
Fly cutter for the lathe
Years ago, when I was still using a milling attachment on my lathe, I decided to build a large scale fly cutter. I was tired of overlap marks that occur when making multiple passes on a workpiece and wanted something with a large enough swing to allow one pass flattening.
The body is a piece of C-channel fitted with a sturdy spigot turned from hex steel. A slot in the channel allows for adjusting the radius on which the tool holder is placed. The tool holder itself is a drilled-out bolt into which the cutter fits, held in place by a small setscrew in the head of the bolt.
This view shows the back of the device...
In use, the spigot is pushed back into the chuck until the back of the tool holder seats on the face of the chuck. This minimizes bending of the device under load.
I haven't used this thing in ages. Once I got a mill, I built a monster two-stage fly cutter that is far superior. It's described here...
http://www.homemadetools.net/forum/m...y-cutter-27295
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks mklotz! We've added your Large Fly Cutter to our Machining category,
as well as to your builder page: mklotz's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/homemade-large-fly-cutter-4">
<img src="/uploads/207455/homemade-large-fly-cutter-4.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/homemade-large-fly-cutter-4">Large Fly Cutter</a>
<span> by <a href="http://www.homemadetools.net/builder/mklotz">mklotz</a></span>
</div>
<div class="tags">tags:
<a href='http://www.homemadetools.net/tag/fly-cutter'>fly cutter</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->