-
Fret end file mount
In the luthier tool category, here is my tool for filing the end of frets on a fretboard :
This is a pretty classical design, it uses a standard flat sharpening file.
The groove is cut on the table saw.
The screw holes are tapped directly in the wood.
The woods comes from a scrap piece of furniture and the bottom is varnished, which happens to be more slippy.
http://www.labellenote.fr/file/homem...e_mount_01.jpg
http://www.labellenote.fr/file/homem...e_mount_02.jpg
http://www.labellenote.fr/file/homem...e_mount_03.jpg
-
Thanks Christophe! I've added your Luthier's File Mount to our Luthiery category, as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/luthier-s-file-mount"><img src="http://www.homemadetools.net/uploads/118492/luthier-s-file-mount.jpeg"
/></a></div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/luthier-s-file-mount">Luthier's File Mount</a>
<span> by <a href="/builder/Christophe+Mineau">Christophe Mineau</a></span>
</div>
<div class="tags">tags: <a href="http://www.homemadetools.net/tag/file">file</a>, <a href="http://www.homemadetools.net/tag/luthiery">luthiery</a></div>
</div>
</div>
</div>
-
I really like the varnish detail, Christophe. Never would have thought of that. :thumbsup:
-
Thanks for posting this Christophe. It's just what I was looking for.
-
