Gantry Style CNC Router Part 1 L@@K

**Captainleeward** · Sep 17, 2016, 07:42 PM

Gantry Style CNC Router Part 1. Made from double sided aluminum plywood, steel, Aluminum bar.
I have made many modifications to these plans just so you know.

These plans are 100% free to down load from CNC ZONE web page and are called Jgro, fantastic set of plans
what a great guy for giving these plans free.

Gantry Style CNC Router Part 1 L@@K-011.jpg

Gantry Style CNC Router Part 1 L@@K-013.jpg

Gantry Style CNC Router Part 1 L@@K-001.jpg

Gantry Style CNC Router Part 1 L@@K-002.jpg

Gantry Style CNC Router Part 1 L@@K-007.jpg

Gantry Style CNC Router Part 1 L@@K-008.jpg

Gantry Style CNC Router Part 1 L@@K-009.jpg

Gantry Style CNC Router Part 1 L@@K-003.jpg

Gantry Style CNC Router Part 1 L@@K-010.jpg

Gantry Style CNC Router Part 1 L@@K-004.jpg

Gantry Style CNC Router Part 1 L@@K-005.jpg

**Christophe Mineau** · Sep 19, 2016, 01:13 PM

Hi Captain !
How are you ?
It looks like you will have a lot of fun with this build, I'm sure !
If only I had some room left in my shop, and some time left also by the time being ...
As you say, the design seems to be clever, let's see what you will make with it after !
Cheers,
Christophe

**Captainleeward** · Sep 19, 2016, 01:39 PM

Hi Ya Christophe, I am gonna get a point for every part on it too.

What have you been building lately? I think this cnc router will take awhile sooo many parts.

**Christophe Mineau** · Sep 19, 2016, 02:20 PM

I haven't got much to show on the tooling side these times, actually I'm quite busy with the house, the children, the job ...
and I spent a lot of time finishing my viola, 50 layers of varnish, that's quite boring at the end ...
But at least, it will be soon finished ..
Ah yes, maybe, I can show a little carbide tool I made for making titanium rings, taking benefit from the lesson learned here from Mister bstanga and all his posts about turning that crazy stuff.
I managed to do it, and turned a couple of nice Titane Ring and Titane/wood also.
Need a little time to show that.
Read you soon !
Christophe

**Captainleeward** · Sep 19, 2016, 10:43 PM

Hi Christophe, Nice to here from you hang in there buddy.....:O)

**pfredX1** · Sep 20, 2016, 12:38 PM

The design looks sound. The proof is in the running though. Until the rubber hits the road you never know. Here's to hoping it works out for you. Good luck!

**Captainleeward** · Sep 20, 2016, 08:01 PM

Hi pfredX1, Thanks for you comments I shall prevail.....:O)

**pfredX1** · Sep 20, 2016, 09:27 PM

I didn't. I ended up building a fixed gantry machine.

**DIYer** · Sep 22, 2016, 06:33 AM

Thanks Captainleeward! We've added your CNC Router Gantry to our CNC category,
as well as to your builder page: Captainleeward's Homemade Tools. Your receipt:

CNC Router Gantry by Captainleeward

tags: CNC, router