Remove advertisements
Results 1 to 8 of 8

Thread: Hand flat vise

  1. #1
    Christophe Mineau's Avatar
    Join Date
    Jul 2014
    Location
    France, Brittany !
    Posts
    630
    Thanks
    356
    Thanked 761 Times in 337 Posts

    Hand flat vise

    Here is a home designed hand vise for multiple purposes.

    It is basilcally made for holding little pieces, it can be a blade for sharpening on the wet grinder, or a little piece of bone, for making a nut for a stringed instrument, for instance.


    The jaws are simply two flat pieces of steel, the base one, welded to the handle is beveled.
    It is tightened thanks to the couple of threaded posts and wing nuts.


    Here it is in use on the wet grinder. I add in this case two pins that go through the base plate and that act as stops when I push against the tool rest bar.


    Here, it is in used with the disk sander. I am preparing a bone nut. The faces must be orthogonal.
    The pins are removed.
    I sometimes need to put a shim, roughly the same width as the workpiece, at the opposite side.


    And here, you will understand the reason for the long handle.
    It is in use on the bandsaw, still while shaping a piece of bone for making a nut.
    Holding little pieces is always an issue and is dangerous on the bandsaw.
    This tool is great for that purpose, and it holds the piece square to the blade.
    Cheers !
    Christophe
    ________________________________________________________________
    Visit my Website : http://www.labellenote.fr/
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  2. The Following 8 Users Say Thank You to Christophe Mineau For This Useful Post:

    bobs409 (03-01-2017), Doc (12-08-2014), kbalch (12-08-2014), Paul Jones (03-01-2017), rlm98253 (10-11-2017), sossol (10-11-2017), Toolmaker51 (10-12-2017), Tuomas (03-01-2017)

  3. #2
    Captainleeward's Avatar
    Join Date
    Jul 2014
    Location
    San DIEGO, California
    Posts
    779
    Thanks
    195
    Thanked 720 Times in 367 Posts
    Hi Christophe, I see you are getting closer Keep clicking that shutter you may just get me..:O)

  4. #3
    Hotz's Avatar
    Join Date
    Feb 2013
    Location
    South of Brazil.
    Posts
    360
    Thanks
    157
    Thanked 69 Times in 49 Posts
    Very good Christophe ..
    Sorry my mistakes in english.
    to share your tip >>> http://www.homemadetools.net/forum/tool-tips-tricks/ <<<

  5. #4
    Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Yorba Linda, California
    Posts
    981
    Thanks
    3,687
    Thanked 951 Times in 482 Posts
    Very practical and yet a work of art. I really like the wood turning details you add to your tool handles and the brass/copper ferrules.

  6. The Following User Says Thank You to Paul Jones For This Useful Post:

    Christophe Mineau (12-07-2014)

  7. #5
    Administrator
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 486 Times in 366 Posts
    Thanks Christophe! I've added your Hand Vise to our Vises and Metalworking categories, as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:


  8. #6
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,059
    Thanks
    250
    Thanked 464 Times in 418 Posts
    Great post, Christophe! That's a cool workholding tool.

  9. #7
    Doc
    Doc is online now

    Join Date
    May 2013
    Posts
    76
    Thanks
    120
    Thanked 37 Times in 26 Posts
    Well done Christophe.

    Any tool that helps you keep all your fingers is good by me

    Doc

  10. #8
    Content Editor Altair's Avatar
    Join Date
    Aug 2013
    Posts
    667
    Thanks
    119
    Thanked 80 Times in 68 Posts
    Very handy for small parts. Great job Christophe.


    Post your reply!
    Join 20,941 of us and get our 50 Must Read Homemade Tools eBook free.



    50 Must Read Homemade Tools

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •