Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15

Thread: Hand Tapper or Hand Hammer

  1. #11
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,433
    Thanks
    357
    Thanked 6,378 Times in 2,116 Posts

    mklotz's Tools
    Quote Originally Posted by jjr2001 View Post
    I think you could but like Marv posted in the "dead blow palm hammer" it needs to be long enough so you don't pinch your hand when using it.
    The other thing with using brass or nylon for the surface is protection of the item being hammered. Also for punches you reduce the chance of knocking off a little chip of steel and either sparking or having it fly to the eye!

    I like the idea of lead shot for the weight. I was wondering if solid lead poured into a brass head would work as well as shot?

    Cheers, JR
    A lot of the "deadness" comes from the numerous little bits of lead colliding with each other. A solid slug of lead would provide weight but would be less dead than shot.

    Lead shot, available from reloader supply places, has all sorts of uses around the shop. Beyond the obvious one of providing easily conformable weight to objects, a leather bag 3/4-filled with shot makes a great conformable gluing weight and a nice surface for doing repousse work.

    186 More Best Homemade Tools eBook
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  2. #12
    Supporting Member jjr2001's Avatar
    Join Date
    Jun 2016
    Posts
    915
    Thanks
    1,182
    Thanked 2,044 Times in 553 Posts

    jjr2001's Tools
    Quote Originally Posted by mklotz View Post
    Did I hear you say "model steam engine run on air pressure"? Those, along with atmospheric and Stirling engines, have been my hobby for quite a while. Although I've built a boiler works, it's far more convenient (and safer) to run them with an airbrush compressor. Here are a couple of samples of my work...

    http://www.homemadetools.net/forum/r...e-engine-41518

    http://www.homemadetools.net/forum/c...1429#post59687

    and this one really does run on steam...

    http://www.homemadetools.net/forum/t...7364#post36925


    They are all very nice works of art Marv. The rope drive is very impressive, never seen anything like it before and of course the
    "toilet steam engine". That is quite unique. If it were mounted on bearings at each end I think it would get to a very high rpm.

    Cheers, JR

    2000 Tool Plans

  3. #13
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,433
    Thanks
    357
    Thanked 6,378 Times in 2,116 Posts

    mklotz's Tools
    It would indeed. And if one of those bearings had a gear on it you would have a way of having it drive something.

    Here's another one that is always a hit at engine shows...

    http://www.homemadetools.net/forum/e...6488#post66523

    Click the thumbnail at the end of the post to see it in action.
    Last edited by mklotz; Apr 24, 2017 at 07:29 AM.
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  4. The Following User Says Thank You to mklotz For This Useful Post:

    jjr2001 (Apr 24, 2017)

  5. #14
    Supporting Member jjr2001's Avatar
    Join Date
    Jun 2016
    Posts
    915
    Thanks
    1,182
    Thanked 2,044 Times in 553 Posts

    jjr2001's Tools
    Never seen anything like it. Must be the most unique engine in the world.
    Looks like the alignment would be critical.
    Very nice. Cheers, JR

  6. #15
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,433
    Thanks
    357
    Thanked 6,378 Times in 2,116 Posts

    mklotz's Tools
    Quote Originally Posted by jjr2001 View Post
    Never seen anything like it. Must be the most unique engine in the world.
    Looks like the alignment would be critical.
    Very nice. Cheers, JR
    It's an exercise in frustration to make and get running. The pistons, which are turned and then forged into a right angle, must be exactly a right angle or they will bind when the cylinders rotate. This need for orthogonality applies to the cylinders as well.

    However, once running it's a real crowd generator at shows. I even had one fellow who, watching it rotate, said it couldn't possibly work. Of course, he was the same guy who insisted that the grooves in the rope engine had to have a non-zero helix angle. They don't.



    186 More Best Homemade Tools eBook
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  7. The Following User Says Thank You to mklotz For This Useful Post:

    jjr2001 (Apr 25, 2017)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •