High speed router base attachment for binding channel

[Christophe Mineau]

Hi ,
This is my homemade depth stop to be used attached to the sole of the famous Stewmac router base for the Dremel.

This is used for cutting binding channels at the edge of flat top instruments like the guitar, or any instrument's head. (Cannot be used on arch top instruments)
The purpose is to set the depth of the cut and allow cutting along curves.

[kbalch]

Thanks Christophe! I've added your Router Base Depth Stop to our Luthiery category, as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:

Router Base Depth Stop by Christophe Mineau

tags: luthiery, depth gauge, stop

[Paul Jones]

I am always amazed at the various uses and adaptations of the Dremel-type tools. Excellent photos showing the details. Paul

[Christophe Mineau]

I am always amazed at the various uses and adaptations of the Dremel-type tools. Excellent photos showing the details. Paul

Thanks Paul, that's true, the Dremel is really handy in all situations (except carving, according to me, it's better to use cutting tools for that)

[DIYer]

That's a nice depth stop, Christophe. Thanks for the share.