Homemade Table Saw

Printable View

Feb 20, 2019, 09:42 AM
Bellevue Woodshop

Homemade Table Saw

10 Years ago I made this table saw.

I made it from salvaged parts (as usual)

I finally got around to make a video of its features.
If you would like you can check it out here.

Hope you like it

Best reg
Roy

https://www.youtube.com/watch?v=0JgZFlCZQbc
Feb 20, 2019, 02:10 PM
Paul Jones

Very nice and useful design for your homemade table saw. I also like your homemade table saw finger board hanging on the back wall. We can never have too many of these for horizontal and vertical pushing parts into the table saw and router table fences. The little extra time in setting up the finger boards can shave at lot in unnecessary scraped parts.

Thank you for the video,

Regards, Paul Jones
Feb 20, 2019, 05:27 PM
wizard69

I have to admit whenn the video first started I was thinking that main table is a granite countertop!!! Fooled me.

In any event this looks like a nicely designed table saw. The sliding table really seal the deal. Frankly I probably would have stopped with vertical adjustment of the blade and avoid blade tilt. You sent an extra mike there.
Feb 22, 2019, 01:39 AM
Bellevue Woodshop

Quote:

Originally Posted by Paul Jones

Very nice and useful design for your homemade table saw. I also like your homemade table saw finger board hanging on the back wall. We can never have too many of these for horizontal and vertical pushing parts into the table saw and router table fences. The little extra time in setting up the finger boards can shave at lot in unnecessary scraped parts.

Thank you for the video,

Regards, Paul Jones

Tank you Paul. The saw has served me well, and as you say accessories for it are well worth the effort.

Best reg
Roy
Feb 22, 2019, 01:42 AM
Bellevue Woodshop

Quote:

Originally Posted by wizard69

I have to admit whenn the video first started I was thinking that main table is a granite countertop!!! Fooled me.

In any event this looks like a nicely designed table saw. The sliding table really seal the deal. Frankly I probably would have stopped with vertical adjustment of the blade and avoid blade tilt. You sent an extra mike there.

Thank you very much. It is actiually the tilt case tat bothers me with thi saw, enoug to start a new build. It does not have trunnions, and that means a hole lot of extra work when setting up. And of course that I have a shelf full of salvaged servos that I want to make use of.

best reg
Roy
Feb 24, 2019, 09:43 PM
jonnydot

Why would trunnions make set up easier?
Feb 25, 2019, 11:44 AM
Bellevue Woodshop

Quote:

Originally Posted by jonnydot

Why would trunnions make set up easier?

Trunnions will make the sawblade pivot around its own axis, and therefor making it possible to use the same insert and the scale on the rip fence will be correct as well.
Also I want to automate it with digital input for all the adjustments
Mar 1, 2019, 06:16 AM
DIYer


Thanks Bellevue Woodshop! We've added your Table Saw to our Table Saws category,
as well as to your builder page: Bellevue Woodshop's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-table-saw-42"> <img src="/uploads/221471/homemade-table-saw-42.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-table-saw-42">Table Saw</a> <span> by <a href="http://www.homemadetools.net/builder/Bellevue+Woodshop_2">Bellevue Woodshop</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/table-saw'>table saw</a> </div> </div> </div> </div>