Printable View
Once I needed to make some turn tables to be mounted flush to the floor for moving trolleys around that ran in a guide track so the direction could be changed
to do this I also needed to make a seal to protect the inner workings of the turn tables the bearings and posilocks
So I made a set up to mount my bead roller on the turn table.
Attachment 25091
Attachment 25092
Attachment 25093
the turn table is 1320 mm in diameter
Attachment 25094
the seal is a 10 mm O ring
Attachment 25095
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Frank S! We've added your Horizontal Bead Roller Setup to our Bead Rollers category,
as well as to your builder page: Frank S's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-horizontal-bead-roller-setup"> <img src="/uploads/216800/homemade-horizontal-bead-roller-setup.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-horizontal-bead-roller-setup">Horizontal Bead Roller Setup</a> <span> by <a href="http://www.homemadetools.net/builder/Frank+S">Frank S</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/bead-roller'>bead roller</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
