Here's something I made from an old magazine article:
https://www.youtube.com/watch?v=4QSq6ZaNhL8
Handy when you need it.
Cheers Rob
Printable View
Here's something I made from an old magazine article:
https://www.youtube.com/watch?v=4QSq6ZaNhL8
Handy when you need it.
Cheers Rob
when I used to turn a commutator, I used to wrap the end of the commutator with emery and the non emery side towards the diameter of the commutator, and the side of the emery clamped on a drill chuck , just touching enough to get a bit of support, put a bit of oil , and there you go .
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks xynudu! We've added your Countersunk Dead Center to our Lathe Accessories category,
as well as to your builder page: xynudu's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-countersunk-dead-center"> <img src="/uploads/224612/homemade-countersunk-dead-center.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-countersunk-dead-center">Countersunk Dead Center</a> <span> by <a href="https://www.homemadetools.net/builder/xynudu">xynudu</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/centering'>centering</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->