How to make a universal Wrench
Please Friends If you liked the video please subscribe to my channel ... please 🙏🏼🙏🏼🙏🏼
weld 2 or 3 nuts instead of 1 ,on the end of bolt and the take a 6 point deep well socket that fits on those nuts, and weld a 1 -2 ft rod onto end of socket for extra leverage ,,a breaker bar of sorts..on the other end of 1 ft rod u could weld another 6 point socket same size at 90 degrees for tightening and loosening.
|
diyfixman (01-29-2019), greyhoundollie (02-03-2019), Jon (01-29-2019)
I really like this tool! Good job on it, too! Also, madokie has a good idea to make it more useful.
My $0.02 includes drilling a through-hole in those double nuts (as suggested) for the addition of a removable "tommy bar" - like the lever arm on a vise to tighten the jaws.
(Full disclosure: I had to actually look up what that lever bar is called because it never occurred to me that it might even have a special name. It does! I saw where someone referred to it as a "tommy bar". Hey, you might win a beer over that, otherwise, useless trivia one day. Please correct me if this is incorrect - I wouldn't want to loose that beer!)
diyfixman (01-29-2019)
Thanks diyfixman! We've added your Universal Wrench to our Fastening category,
as well as to your builder page: diyfixman's Homemade Tools. Your receipt:
diyfixman (02-04-2019)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks