-
Lathe carriage stop
Yet another set of Lathe carriage stops.
Nothing special in this design, I just took the profile of my bed rail using a profile comb gauge.
I used a brass pin as a pivot, it is simply locltite-ed to the top part just to avoid loosing it.
I did this because it saved me some milling time compared to make a step as often seen.
http://www.labellenote.fr/file/homem..._stop_0001.jpg
http://www.labellenote.fr/file/homem..._stop_0002.jpg
http://www.labellenote.fr/file/homem..._stop_0003.jpg
-
I like your carriage stop nice and simple in design
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Christophe Mineau! We've added your Lathe Carriage Stop to our Lathe Accessories category,
as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/homemade-lathe-carriage-stop-7">
<img src="/uploads/213986/homemade-lathe-carriage-stop-7.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/homemade-lathe-carriage-stop-7">Lathe Carriage Stop</a>
<span> by <a href="http://www.homemadetools.net/builder/Christophe+Mineau">Christophe Mineau</a></span>
</div>
<div class="tags">tags:
<a href='http://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='http://www.homemadetools.net/tag/carriage-stop'>carriage stop</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->