Free 173 Best Homemade Tools eBook:  
Remove advertisements
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: Lathe Carriage Stop

  1. #1
    rossbotics rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    634
    Thanks
    845
    Thanked 1,226 Times in 344 Posts

    rossbotics's Tools

    Lathe Carriage Stop

    After finishing the extended point live center and parting tool holder for my small lathe that Iíve been working on for the past several weeks I figured I would make the final attachment for this little beast by making a carriage stop, the machine came with a threading dial, follower rest, steady rest and change gears for threading but no carriage stop and there is no availability for one, I have had the need for this attachment several times in the past but always seamed to work around it, I donít use this little machine to often but itís nice to have everything you need when youíre doing a job.

    After doing a little measuring I came up with a design that I thought would suite the purpose, the body and clamp plate were made from 4140 annealed steel while the adjustable stop screw, thumb screw and clamping screw were made from 12L14 and the graduated dial from 6061 aluminum, this attachment has a ground finish for now but Iíll probably oil blacken it later on for rust purposes, this tool works and functions as intended and looks nice on the machine.


    I have included some manufacturing photos and a video making the graduated dial.


    As always thanks for looking and happy machining

    Doug

    Lathe Carriage Stop-1.jpg Lathe Carriage Stop-2.jpg Lathe Carriage Stop-3.jpg

    Lathe Carriage Stop-4.jpg Lathe Carriage Stop-5.jpg Lathe Carriage Stop-6.jpg

    Lathe Carriage Stop-7.jpg Lathe Carriage Stop-8.jpg Lathe Carriage Stop-9.jpg

    Lathe Carriage Stop-10.jpg

    <span style="font-family: Calibri"><font size="3"><font color="#000000">
    Last edited by rossbotics; 11-21-2018 at 04:36 AM.
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber



    Tool Plans for Sale by rossbotics






  2. The Following 12 Users Say Thank You to rossbotics For This Useful Post:

    high-side (10-19-2018), jjr2001 (10-19-2018), LMMasterMariner (10-18-2018), Metallurg33 (10-20-2018), MountainMan (10-27-2018), olderdan (10-21-2018), old_toolmaker (10-19-2018), Paul Jones (10-20-2018), PJs (10-21-2018), Seedtick (10-18-2018), sossol (10-19-2018), threesixesinarow (10-21-2018)

  3. #2
    LMMasterMariner's Avatar
    Join Date
    Jan 2016
    Location
    Dubrovnik, Croatia
    Posts
    189
    Thanks
    469
    Thanked 353 Times in 103 Posts

    LMMasterMariner's Tools
    Nice job as always. Great looking final product. Also one of my next projects, but I will make body from teflon. Already cut block 100 x 65 x 35 mm out of big round bar.

  4. The Following User Says Thank You to LMMasterMariner For This Useful Post:

    rossbotics (10-18-2018)

  5. #3
    rossbotics rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    634
    Thanks
    845
    Thanked 1,226 Times in 344 Posts

    rossbotics's Tools
    Quote Originally Posted by LMMasterMariner View Post
    Nice job as always. Great looking final product. Also one of my next projects, but I will make body from teflon. Already cut block 100 x 65 x 35 mm out of big round bar.
    Thanks LMMasterMiriner

    Doug
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber



    Tool Plans for Sale by rossbotics






  6. #4
    old_toolmaker's Avatar
    Join Date
    Dec 2017
    Location
    Minnesota
    Posts
    246
    Thanks
    139
    Thanked 241 Times in 82 Posts

    old_toolmaker's Tools
    rossbotics,

    Nice job, Doug! I'm sure that little attachment will like living on your lathe. I do some short production work and that would come in handy for some jobs.
    Dick


    Links to some of my plans:

    http://www.homemadetools.net/forum/f...6068#post65876 OFF-SET TAILSTOCK CENTER PLANS
    http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
    http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
    http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
    http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

  7. #5
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,098
    Thanks
    373
    Thanked 743 Times in 678 Posts


    Thanks rossbotics! We've added your Carriage Stop to our Lathe Accessories category,
    as well as to your builder page: rossbotics's Homemade Tools. Your receipt:




  8. #6
    rossbotics rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    634
    Thanks
    845
    Thanked 1,226 Times in 344 Posts

    rossbotics's Tools
    Quote Originally Posted by old_toolmaker View Post
    rossbotics,

    Nice job, Doug! I'm sure that little attachment will like living on your lathe. I do some short production work and that would come in handy for some jobs.
    Thanks Dick
    The main reason I made it was for boring up to a shoulder, but it will come in nice for a production run as well

    Doug
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber



    Tool Plans for Sale by rossbotics






  9. The Following 3 Users Say Thank You to rossbotics For This Useful Post:

    olderdan (10-21-2018), old_toolmaker (10-21-2018), PJs (10-21-2018)

  10. #7
    old_toolmaker's Avatar
    Join Date
    Dec 2017
    Location
    Minnesota
    Posts
    246
    Thanks
    139
    Thanked 241 Times in 82 Posts

    old_toolmaker's Tools
    rossbotics,

    Hi Doug,
    I actually have a 20" DRO mounted on the backside of my 7 x 16 Micromark mini lathe. That takes care of most of my depth needs, but it still would be nice to have a depth stop for those longer run jobs that become mundane. That is when I tend to get careless and accidents can happen. A positive stop is good insurance.
    Dick


    Links to some of my plans:

    http://www.homemadetools.net/forum/f...6068#post65876 OFF-SET TAILSTOCK CENTER PLANS
    http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
    http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
    http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
    http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

  11. The Following 2 Users Say Thank You to old_toolmaker For This Useful Post:

    olderdan (10-21-2018), PJs (10-21-2018)

  12. #8
    PJs
    PJs is online now
    PJs's Avatar
    Join Date
    Sep 2014
    Location
    Northern CA
    Posts
    1,693
    Thanks
    7,649
    Thanked 948 Times in 628 Posts

    PJs's Tools
    Thanks for the video demonstration of your stamping jig Doug! Another beautiful build, simple and elegant! It's also cool to see how earlier tools help build other tools and so on...Pure HMT greatness.
    ĎĎAlways do right. This will gratify some people and astonish the rest.íí
    Mark Twain

  13. The Following User Says Thank You to PJs For This Useful Post:

    rossbotics (10-22-2018)

  14. #9
    olderdan's Avatar
    Join Date
    Jun 2016
    Location
    Devon UK
    Posts
    454
    Thanks
    977
    Thanked 871 Times in 296 Posts

    olderdan's Tools
    Great job Doug (we expect nothing less), I would not be without mine as I rarely use my topslide.

  15. #10
    olderdan's Avatar
    Join Date
    Jun 2016
    Location
    Devon UK
    Posts
    454
    Thanks
    977
    Thanked 871 Times in 296 Posts

    olderdan's Tools
    Quote Originally Posted by old_toolmaker View Post
    rossbotics,

    Hi Doug,
    I actually have a 20" DRO mounted on the backside of my 7 x 16 Micromark mini lathe. That takes care of most of my depth needs, but it still would be nice to have a depth stop for those longer run jobs that become mundane. That is when I tend to get careless and accidents can happen. A positive stop is good insurance.
    DROs are fine and I often wish I had them but an accurate bed stop will let you concentrate on what is going on without having one eye on a counting down readout, I may yet fit one to my crosslide as that will be all I need to eliminate the backlash from readings.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •