1 Attachment(s)
Revised Die and Tap Holder
After making a new set of holders for my Sherline bench top lathe I decided to modify my orginal
tapping tool for the 7x16 mini lathe.
This tool was just a bit large for my little 7x16 mini lathe. Just a bit too long.
Not much to the mod but it just feels better and I now have a nice 1" long x 1 5/8 diameter blank
that I will use to make a quick drill guide.
So I just cut off 1" from the main body and even more from the MT2 adapter.
I removed 1 3/4" from the straight end of the shaft.
Not a big deal but it just seems to fit the little 7x16 better.
Cheers, JR