Free 173 Best Homemade Tools eBook:  
Remove advertisements
Results 1 to 3 of 3

Thread: LATHE Modification of a tailstock - quick drilling Video

  1. #1
    Maszynotwór's Avatar
    Join Date
    Feb 2019
    Location
    PL Gliwice
    Posts
    5
    Thanks
    1
    Thanked 16 Times in 4 Posts

    Maszynotwór's Tools

    LATHE Modification of a tailstock - quick drilling Video

    Hi, I am Adam for years building DIY machines.
    I was invited to put my work on this forum

    Modification of a tailstock - quick drilling
    Using a DIY chisel frame
    I made simple modifications thanks to which I can quickly change the usual method of cranking the crank to very fast and convenient levers
    Benefits:
    Easy to do
    It's easy to drill deep holes - breaking the chip, pouring the spoil
    Perfect for small rings - shortening the arm, we feel how much strength we apply to the tool
    you can thread - the tap itself pulls / pushes the pinole
    the extension range has increased

    *e.t.c


  2. The Following 7 Users Say Thank You to Maszynotwór For This Useful Post:

    baja (03-04-2019), David Johnson (02-26-2019), IAMSatisfied (03-03-2019), Jon (02-22-2019), Paul Jones (02-23-2019), rlm98253 (02-25-2019), Seedtick (02-25-2019)

  3. #2
    Toolmaker51's Avatar
    Join Date
    Feb 2016
    Location
    Midwest USA
    Posts
    1,544
    Thanks
    2,946
    Thanked 1,427 Times in 852 Posts

    Toolmaker51's Tools
    NICE JOB! The world's seen many lathes, only a few have lever-operated tailstocks; at serious additional expense! Peck drilling allows the available RPM to do it's work on drill bits/ reamers/ counterbores etc at decent feed rate. A screw driven quill just can't.
    Not to mention limitation of human wrists.
    Sincerely,
    Toolmaker51
    ...we'll learn more by wandering than searching...

  4. The Following User Says Thank You to Toolmaker51 For This Useful Post:

    Paul Jones (02-23-2019)

  5. #3
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,107
    Thanks
    403
    Thanked 795 Times in 730 Posts


    Thanks Maszynotwór! We've added your Tailstock Modification to our Lathe Accessories category,
    as well as to your builder page: Maszynotwór's Homemade Tools. Your receipt:





    Post your reply!
    Join 33,912 of us and get our 173 Must Read Homemade Tools eBook free.



    173 Must Read Homemade Tools

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •