Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 2 of 2

Thread: Machine dogs, simple to make and use.

  1. #1
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,062 Times in 406 Posts

    thehomeengineer's Tools

    Machine dogs, simple to make and use.

    Hi All,

    Many of you are probably already using dogs but for those new to milling may find this of interest.

    These are the simplest of items to make and one of the most useful pieces of kit to have to hand for setting up the mill.
    They are simply hexagon or square pieces of material cut to the desired length that are a good tight fit in the tee slots of the machine table. They can be drilled so they can be permanently fitted to work holding devices, this is why I prefer hexagon as it can be held in a three-jaw chuck to be drilled centrally.

    Sometimes vices etc. have a pre-machined slot and tapped holes so your own dogs can be fitted.
    Please note I have stated hexagon or square stock. I do not recommend round stock as the point contact of round stock can damage the tee slot when pieces are pushed against them.

    I use machine dogs for alignment of all types of items on the mill from angle plates, Vee blocks, vices, dividing head, jigs and fixtures or just the workpiece being machined. As previously stated dogs can be permanently attached to the base of certain items such as the machine vice and dividing head but others items are simply pushed against the dogs for alignment.

    Please see the photos below showing vee blocks being pushed against the hexagon dogs and photos show permanently fitted dogs to vices and an indexing head.

    Machine dogs, simple to make and use.-img_1583.jpg
    5/8" hexagon to suit tee slots on Bridgeport mill.

    Machine dogs, simple to make and use.-img_1587.jpg
    Two vee blocks alingned by pushing against the hexagon tee slot dogs.

    Machine dogs, simple to make and use.-img_1584.jpg
    Vee blocks and dogs moved further apart to support longer work piece.

    Machine dogs, simple to make and use.-img_1593.jpgMachine dogs, simple to make and use.-img_1594.jpgMachine dogs, simple to make and use.-img_1595.jpgMachine dogs, simple to make and use.-img_1596.jpg
    Permanently fitted dogs

    Thank you for viewing
    The Home Engineer

    186 More Best Homemade Tools eBook

  2. The Following 4 Users Say Thank You to thehomeengineer For This Useful Post:

    Metallurg33 (Apr 8, 2018), ncollar (Apr 7, 2018), Seedtick (Apr 7, 2018), Toolmaker51 (Apr 8, 2018)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks thehomeengineer! We've added your Machining Dogs to our Machining category,
    as well as to your builder page: thehomeengineer's Homemade Tools. Your receipt:




    2000 Tool Plans

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •