Printable View
got the idea for this from fixtures built from steel auto wheels but wanted to make something smaller, lighter, and that could be clamped in a vice. Cut the top part off a heavy duty bucket and cut a hole in a piece of plywood to match, attached them with screws, the rest is a piece of angle iron and some 5/8" threaded rod with hardware to suit. A 3/4" drive socket works well as a spacer between the wingnut and the shell of the wheel bearing.
Thanks again Bluto! This one's been added to our Motorcycle category, and of course to your homemade tools page: Bluto's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"><div class="bimg"><div><a href="/motorcycle-tire-changing-fixture"><img src="/images/thumb/3b/3bf68594b224e137c1b5de03f726edc6-20121018125445.jpg" alt="Motorcycle Tire Changing Fixture"/></a></div></div><div class="head pngfix"></div><div class="left pngfix"></div><div class="right pngfix"></div><div class="blockover b1 pngfix"><div class="title"><a href="/motorcycle-tire-changing-fixture">Motorcycle Tire Changing Fixture</a><span> by <a href="/builder/Bluto">Bluto</a></span></div><div class="tags">tags: <a href="/tag/tire">tire</a></div></div></div></div>