MT0 to 3/8-24 Morse taper arbor from scrap

[jjr2001]

I bought some threaded rods with hex centers from my favorite nut and bolt supplier who deals with new and surplus material.
At the time I did not have a plan for them. They were metric threads but I thought I could use the stock at a later date.
So far I built 4 machinist jacks from them and now I added these MT-0 and MT-future taper adapters.
You can see in the pictures two that have been completed and 4 are still blank for future use.

Cheers, JR

[old_toolmaker]

jjr2001,

Good application for using surplus material. there is no such thing as having too much tooling!

[jjr2001]

Indeed! I agree with that but I think I may need another room for all my stuff!

Cheers, JR

[PJs]

Ah ha! There it is! Thanks JR...Nice job on all of them using the surplus standoffs!

[DIYer]

Thanks jjr2001! We've added your Morse Taper Arbor Adaptor to our Miscellaneous category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

Morse Taper Arbor Adaptor by jjr2001

tags: adaptor