Printable View
Probably you will have seen several times cutting magnetic hand saw guides. But I dare to say that never one guide that allows you to make the cut in several angles.
Here I’m presenting the multi-angle magnetic hand saw guide that I hope you like it and share your comments about it.
It's an indispensable guide which will become a "must" in your workshop.
https://youtu.be/TCm7C_1FTNw
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Mikhandmaker! We've added your Multi Angle Magnetic Hand Saw Guide to our Woodworking category,
as well as to your builder page: Mikhandmaker's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-multi-angle-magnetic-hand-saw-guide"> <img src="/uploads/168949/homemade-multi-angle-magnetic-hand-saw-guide.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-multi-angle-magnetic-hand-saw-guide">Multi Angle Magnetic Hand Saw Guide</a> <span> by <a href="http://www.homemadetools.net/builder/Mikhandmaker">Mikhandmaker</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/saw'>saw</a>, <a href='http://www.homemadetools.net/tag/magnet'>magnet</a>, <a href='http://www.homemadetools.net/tag/guide'>guide</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Congratulations Mikhandmaker - your Multi-Angle Magnetic Hand Saw Guide is the Homemade Tool of the Week!
It's hard to win this award with such a common tool, but this build is an uncommonly nice example. This is a strong video too, and it's fitting that it ends with the tool being boxed up and wrapped as a gift!
Nice week yet again :) Some picks: a Vertical Slide Indexer by olderdan, a Machinist Jack Punch by Frank S, a Mill Vise Squaring Method by astroracer, a Hand Hammer by jjr2001, a No-Mess Oil Filter Wrench by mattthemuppet, a Remote Start Switch by nortin, and a Mini Press by Arcadia.
Mikhandmaker - you'll be receiving one of our official HomemadeTools.net T-shirts:
https://s3-us-west-1.amazonaws.com/hmt-forum/shirts.png
Please PM me a mailing address, black/white color choice, and size preference, and I'll get it mailed out shortly.
And, we've added the wrench-on-pedestal award to the awards showcase in your postbit, visible beneath your username:
https://www.homemadetools.net/forum/...eWeekIcon4.png
Congrats again and nice job! :thumbsup:
Thank you very much for the award. This is the first time I show the tools that I build by myself, but this encourage me to follow sharing my projects.
Thanks again!
Congrats, well deserved, I like it and will cettainly make one !
Thanks Christophe! :beer:Quote:
Originally Posted by Christophe Mineau
Congratulations Mikhandmaker, your Multi Angle Magnetic Hand Saw Guide is our Best Documented Build winner for April 2017!
We had a lot of submissions this April that included detailed plans. In fact, this may be our best month for build documentation. Nevertheless, it's hard to beat a nicely-edited video that documents the entire build process.
Some other nicely-documented builds from April: a Carbide Turning Tool by BrucePutnam, a Tailstock Cam Lock by LMMasterMariner, a Parting Tool Spring Type Holder by jjr2001, a Lathe Form Tool Spring Holder by jjr2001, a Laser Aligner by tonyfoale, a Laser Aligner by editor@glue-it.com, a Sensitive Drilling Platform by mklotz, a Dremel Plunge Router Base by jjr2001, a Precision Drill Press by editor@glue-it.com, a Finger Plate by jjr2001, and a Compound Rest Adjustment Adaptor by hemmjo.
Mikhandmaker - please confirm your email address via PM to me, and I'll get your $35 award sent out, via your choice of PayPal, Amazon, or bitcoin.
Congrats again! :rocker:
Here are all of our previous monthly Best Documented Build winners:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://rick.sparber.org/XYBR.pdf"><img src="/uploads/116594/homemade-x-y-backlash-reduction-method.jpeg" alt="X-Y Backlash Reduction Method"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://rick.sparber.org/XYBR.pdf">X-Y Backlash Reduction Method</a> <span> by <a href="/builder/Rick+Sparber">Rick Sparber</a></span> </div> <div class="tags">tags: <a href="/tag/cnc">CNC</a>, <a href="/tag/mill">mill</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/my-homemade-18-band-saw-18687#post26090"><img src="/uploads/120220/homemade-18-bandsaw.jpeg" alt="18\" Bandsaw"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/my-homemade-18-band-saw-18687#post26090">18" Bandsaw</a> <span> by <a href="/builder/mr95gst">mr95gst</a></span> </div> <div class="tags">tags: <a href="/tag/bandsaw">bandsaw</a>, <a href="/tag/motor">motor</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/diy-fume-extractor-19776#post27938"><img src="/uploads/124513/homemade-soldering-fume-extractor-4.jpeg" alt="Soldering Fume Extractor"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/diy-fume-extractor-19776#post27938">Soldering Fume Extractor</a> <span> by <a href="/builder/AMG+warkshop_2">AMG warkshop</a></span> </div> <div class="tags">tags: <a href="/tag/fumes">fumes</a>, <a href="/tag/fan">fan</a>, <a href="/tag/power-supply">power supply</a>, <a href="/tag/soldering">soldering</a>, <a href="/tag/extractor">extractor</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/making-large-axe-20033#post28518"><img src="/uploads/125380/homemade-axe.jpeg" alt="Axe"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/making-large-axe-20033#post28518">Axe</a> <span> by <a href="/builder/Garage+workshop">Garage workshop</a></span> </div> <div class="tags">tags: <a href="/tag/hand-tools">hand tools</a>, <a href="/tag/forging">forging</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/adjustable-height-gantry-hoist-28188#post38349"><img src="/uploads/130452/homemade-adjustable-height-gantry-hoist.jpeg" alt="Adjustable Height Gantry Hoist"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/adjustable-height-gantry-hoist-28188#post38349">Adjustable Height Gantry Hoist</a> <span> by <a href="/builder/MetalDesigner">MetalDesigner</a></span> </div> <div class="tags">tags: <a href="/tag/hoist">hoist</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://rick.sparber.org/AAD.pdf"><img src="/uploads/138590/homemade-rotary-table-a-axis-conversion.png" alt="Rotary Table A Axis Conversion"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://rick.sparber.org/AAD.pdf">Rotary Table A Axis Conversion</a> <span> by <a href="/builder/Rick+Sparber">Rick Sparber</a></span> </div> <div class="tags">tags: <a href="/tag/cnc">CNC</a>, <a href="/tag/conversion">conversion</a>, <a href="/tag/motor">motor</a>, <a href="/tag/rotary-table">rotary table</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/direct-indexing-sharpening-fixture-31319#post43293"><img src="/uploads/136090/homemade-direct-indexing-sharpening-fixture.jpeg" alt="Direct Indexing Sharpening Fixture"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/direct-indexing-sharpening-fixture-31319#post43293">Direct Indexing Sharpening Fixture</a> <span> by <a href="/builder/rossbotics">rossbotics</a></span> </div> <div class="tags">tags: <a href="/tag/sharpening">sharpening</a>, <a href="/tag/fixture">fixture</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/cnc-router-build-adept-robotic-cartesian-slides-21166-8#post44555"><img src="/uploads/137446/homemade-cnc-router-22.jpeg" alt="CNC Router"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/cnc-router-build-adept-robotic-cartesian-slides-21166-8#post44555">CNC Router</a> <span> by <a href="/builder/machiningfool">machiningfool</a></span> </div> <div class="tags">tags: <a href="/tag/cnc">CNC</a>, <a href="/tag/router">router</a>, <a href="/tag/electronics">electronics</a>, <a href="/tag/controller">controller</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/shop-built-angle-plate-33132#post46409"><img src="/uploads/138630/homemade-angle-plate-5.jpeg" alt="Angle Plate"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/shop-built-angle-plate-33132#post46409">Angle Plate</a> <span> by <a href="/builder/astroracer_2">astroracer</a></span> </div> <div class="tags">tags: <a href="/tag/angle">angle</a>, <a href="/tag/plate">plate</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/depth-measuring-base-caliper-gauge-37943#post52684"><img src="/uploads/141819/homemade-depth-measuring-caliper-base.jpeg" alt="Depth Measuring Caliper Base"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/depth-measuring-base-caliper-gauge-37943#post52684">Depth Measuring Caliper Base</a> <span> by <a href="/builder/xynudu">xynudu</a></span> </div> <div class="tags">tags: <a href="/tag/caliper">caliper</a>, <a href="/tag/base">base</a>, <a href="/tag/mount">mount</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/radial-arm-saw-table-jig-39759#post55871"><img src="/uploads/144375/homemade-radial-arm-saw-table-4.jpeg" alt="Radial Arm Saw Table"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/radial-arm-saw-table-jig-39759#post55871">Radial Arm Saw Table</a> <span> by <a href="/builder/Brendon">Brendon</a></span> </div> <div class="tags">tags: <a href="/tag/saw">saw</a>, <a href="/tag/table">table</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/vice-metal-casting-3d-printed-patterns-41780#post60325"><img src="/uploads/147859/homemade-vise-casting-molds.jpeg" alt="Vise Casting Molds"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/vice-metal-casting-3d-printed-patterns-41780#post60325">Vise Casting Molds</a> <span> by <a href="/builder/MetalDesigner">MetalDesigner</a></span> </div> <div class="tags">tags: <a href="/tag/casting">casting</a>, <a href="/tag/3d-printing">3D printing</a>, <a href="/tag/molds">molds</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/diy-hacksaw-blade-handle-44952#post64528"><img src="/uploads/151187/homemade-hacksaw-blade-handle.jpeg" alt="Hacksaw Blade Handle"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/diy-hacksaw-blade-handle-44952#post64528">Hacksaw Blade Handle</a> <span> by <a href="/builder/AMG+warkshop_2">AMG warkshop</a></span> </div> <div class="tags">tags: <a href="/tag/handle">handle</a>, <a href="/tag/hacksaw">hacksaw</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://rick.sparber.org/MCEEF.pdf"><img src="/uploads/152224/homemade-electronic-edge-finder.png" alt="Electronic Edge Finder"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://rick.sparber.org/MCEEF.pdf">Electronic Edge Finder</a> <span> by <a href="/builder/Rick+Sparber">Rick Sparber</a></span> </div> <div class="tags">tags: <a href="/tag/electronics">electronics</a>, <a href="/tag/edge-finder">edge finder</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/homemade-mini-jointer-using-power-planer-48091#post68583"><img src="/uploads/153680/homemade-mini-jointer.jpeg" alt="Mini Jointer"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/homemade-mini-jointer-using-power-planer-48091#post68583">Mini Jointer</a> <span> by <a href="/builder/Baijalashok">Baijalashok</a></span> </div> <div class="tags">tags: <a href="/tag/jointer">jointer</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/homemade-bar-clamp-re-bar-clamp-50301#post72206"><img src="/uploads/156217/homemade-bar-clamp-10.png" alt="Bar Clamp"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/homemade-bar-clamp-re-bar-clamp-50301#post72206">Bar Clamp</a> <span> by <a href="/builder/AMG+warkshop_2">AMG warkshop</a></span> </div> <div class="tags">tags: <a href="/tag/clamp">clamp</a>, <a href="/tag/rebar">rebar</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/dremelathe-diy-woodworking-station-51175#post73876"><img src="/uploads/157425/homemade-dremel-lathe-conversion.png" alt="Dremel Lathe Conversion"></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/dremelathe-diy-woodworking-station-51175#post73876">Dremel Lathe Conversion</a> <span> by <a href="/builder/Tuomas">Tuomas</a></span> </div> <div class="tags">tags: <a href="/tag/lathe">lathe</a>, <a href="/tag/dremel">Dremel</a>, <a href="/tag/modification">modification</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-table-saw-29"> <img src="/uploads/159489/homemade-table-saw-29.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-table-saw-29">Table Saw</a> <span> by <a href="https://www.homemadetools.net/builder/Tuomas">Tuomas</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/table-saw'>table saw</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-truck-crane-3"><img src="https://www.homemadetools.net/uploads/161801/homemade-truck-crane-3.jpeg"/></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-truck-crane-3">Truck Crane</a> <span> by <a href="/builder/ibdilbert">ibdilbert</a></span> </div> <div class="tags">tags: <a href="https://www.homemadetools.net/tag/truck-crane">truck crane</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/forum/quick-acting-drill-table-vice-54820#post80639"> <img src="/uploads/161713/homemade-table-vise.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/forum/quick-acting-drill-table-vice-54820#post80639">Table Vise</a> <span> by <a href="https://www.homemadetools.net/builder/brianhw">brianhw</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/vise'>vise</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-tool-and-cutter-grinder-6"> <img src="/uploads/163509/homemade-tool-and-cutter-grinder-6.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-tool-and-cutter-grinder-6">Tool and Cutter Grinder</a> <span> by <a href="https://www.homemadetools.net/builder/tonyfoale">tonyfoale</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/grinder'>grinder</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-sandpaper-dispenser-3"> <img src="https://www.homemadetools.net/uploads/166657/homemade-sandpaper-dispenser-3.png"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-sandpaper-dispenser-3">Sandpaper Dispenser</a> <span> by <a href="https://www.homemadetools.net/builder/Tim+Pettigrew">Tim Pettigrew</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/sandpaper'>sandpaper</a>, <a href='https://www.homemadetools.net/tag/storage'>storage</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-simple-grinding-rest"> <img src="/uploads/167241/homemade-simple-grinding-rest.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-simple-grinding-rest">Simple Grinding Rest</a> <span> by <a href="https://www.homemadetools.net/builder/Metaler">Metaler</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/grinding'>grinding</a> </div> </div> </div> </div>
Thank you very much Jon!! As you know it is my first project here but although I also think that the video is quite good documented, for my next projects I will also try to make a description with the steps. I am so glad you like it!!Quote:
Originally Posted by Jon