Multi V-Block Plans available

I used Doug Ross's plans for the basis of my V-block. My vise for the mill is a 4" width so his plan looked quite good.
Here are Doug's plans:
http://www.homemadetools.net/forum/m...8657#post26049

I made changes to the plans since I wanted a "soft" V-Block since I plan on using it with
aluminum,brass and plastic. I also "cheated" on the vertical grooves since I had a nice new
carbide 2 flute router bit with a nice 45 degree angle. Much faster than the way I made the long grooves.
I also have two nice V-Blocks that I set vertical in the mill for working on the end of parts. What I really
needed was the long grooves and that is why I built Doug's plan.
For the long grooves I used an end mill and flipped the part 180 deg to complete the opposite half. That
works good but it does take a bit longer and the part is a bit harder to hold for the vertical Vees.

I tried not to cut too deep since it is just aluminum but when clamped in the vise it should work fine.

Thanks to Doug for the fine set of prints and instructions for making a very useful tool for the shop.

Cheers, JR

Very nice work. As long as you have the router bit, you might want to consider some very shallow V-grooves to hold material with a very small diameter. As I can testify, such are very handy for jobs like shortening 2-56 screws.

Thanks Marv, excellent idea. Still plenty of room for more Vee's.

Cheers, JR

Nice work JR and Thank You
That V-Block has came in handy so many times I couldn't count them.

Thanks Again Doug

Nice work! Since you posted your build from plans, you get another free set of plans of your choice. Let me know which ones you want and I'll send them out to you.

Thanks Doug and Jon, I can always use another set of plans!
Cheers, JR

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Multi V Block to our Machining category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-multi-v-block-2"> <img src="/uploads/218868/homemade-multi-v-block-2.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-multi-v-block-2">Multi V Block</a> <span> by <a href="http://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/v-block'>V-block</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->