I did a video showing the Radius / Ball turner I built a few years ago. I take it apart to show how it was made then I show it cutting a concave and convex radius.
https://youtu.be/JD_lkUARUzU
I did a video showing the Radius / Ball turner I built a few years ago. I take it apart to show how it was made then I show it cutting a concave and convex radius.
https://youtu.be/JD_lkUARUzU
Thanks! Simple, rigid and operative mount, and a clever greased register bearing,
doing away with any ball bearing that'll just add stack height and less rigidity.
Nicely machined insert holder also, but did you mention the inserts' rake angle?
You might consider changing the set screws for brass dog points, to avoid marring the holder, tho.
2 cents
Thank you for your advice, I like the idea of dog points, I will have to add those. The rake angle was 5 degrees and I did forget to mention that in the video and that is an important part of getting successful cuts. I will mention that in the description on youtube.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks 737mechanic! We've added your Radius Ball Turner to our Lathe Accessories category,
as well as to your builder page: 737mechanic's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-radius-ball-turner"> <img src="/uploads/224936/homemade-radius-ball-turner.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-radius-ball-turner">Radius Ball Turner</a> <span> by <a href="https://www.homemadetools.net/builder/737mechanic_2">737mechanic</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/ball-turning'>ball turning</a>, <a href='https://www.homemadetools.net/tag/radius'>radius</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Way cool I love Homemadetools thanks for sharing
Thank you.....
I think I have Found My Ball Turner Project!!!! This one should be Stickyed(?)
Thank You for documenting this!
Thanks again
Ken