I made this dial indicator holder to fit my AXA quick change tool :headscratch:post. It holds AGD and other type indicators. I made it out of 6061 aluminum. Works better than magnet.
Printable View
I made this dial indicator holder to fit my AXA quick change tool :headscratch:post. It holds AGD and other type indicators. I made it out of 6061 aluminum. Works better than magnet.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks oldtimer! We've added your QCTP Indicator Holder to our Lathe Accessories category,
as well as to your builder page: oldtimer's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/qctp-indicator-holder-4"> <img src="/uploads/155085/qctp-indicator-holder-4.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/qctp-indicator-holder-4">QCTP Indicator Holder</a> <span> by <a href="http://www.homemadetools.net/builder/oldtimer">oldtimer</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='http://www.homemadetools.net/tag/indicator-holder'>indicator holder</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Good idea. I hate my mag base holder. Im going to make one of these.
oldtimer,
I really like your design and very practical because so often the QCTP is not set perpendicular to the work or the DI does not have easy access to the part surface. Thank you very much for posting this.
Regards, Paul