Self Setting Parallels for the Drilling Vice

When drilling a part, supported by parallels in the drilling machine vice it is probable that, like me, you have had the problem of keeping the drill away from the parallels as the drill breaks through. The device in this video virtually eliminates the problem, except if any part of a holes diameter breaks into an area closer than 2mm from its edge. Even then, there are ways to avoid the problem whilst still using the device.

The Video https://www.youtube.com/watch?v=omG8NXjKetw

I know I have repeated the following many times but for those new to my videos an index of those already public can be found here Harold Halls Videos, index

Harold Hall

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Metaler! We've added your Self Setting Parallels to our Drilling and Drill Presses category,
as well as to your builder page: Metaler's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-self-setting-parallels"> <img src="/uploads/164509/homemade-self-setting-parallels.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-self-setting-parallels">Self Setting Parallels</a> <span> by <a href="http://www.homemadetools.net/builder/Metaler">Metaler</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/parallel-clamp'>parallel clamp</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->