Setting Up Backlash Corrections for Computer Numerical Control using Mach3

I am just starting to learn about Computer Numerical Control (CNC) including Mach3 to drive my RF-30 mill/drill. One of my first baby steps was to set up the backlash parameters. These are important because I am using the existing lead screws and not ball recirculating lead screws which have little if any backlash.

If you are interested, please see

http://rick.sparber.org/BKLSH.pdf


Your comments are welcome. All of us are smarter than any one of us.


If you wish to receive future article announcements automatically, please send me an email with “Article Alias” in the subject line.

Thanks,

Rick

Thanks Rick! I've added your CNC Backlash Correction Method to our CNC and Digital Readouts categories, as well as to your builder page: Rick Sparber's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="/cnc-backlash-correction-method"><img src="/uploads/112530/cnc-backlash-correction-method.jpeg" alt="CNC Backlash Correction Method" /></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="/cnc-backlash-correction-method">CNC Backlash Correction Method</a> <span> by <a href="/builder/Rick+Sparber">Rick Sparber</a></span> </div> <div class="tags"> tags: <a href="/tag/cnc">CNC</a>, <a href="/tag/dial-indicator">dial indicator</a>, <a href="/tag/dro">DRO</a>, <a href="/tag/software">software</a> </div> </div> </div> </div>

Great writeup, Rick! Shows the educator in you.

This thread has been moved to the Must Read subforum. Congrats (and thanks) to Rick for making such a valuable contribution!