Shop Made Milling Head, for the lathe

This project is primarily aimed at the workshop owner who works with just a lathe and drilling machine.The design therefore, has been produced so that it can be made without the use of a milling machine.

The video is short, less than five minutes, so even if you have a milling machine it may be worth viewing out of interest.

https://www.youtube.com/watch?v=6-Z2WO2nShQ

The page on my website where the drawings and method of manufacter can be found is here. Milling Head For the lathe 1

Harold Hall

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Metaler! We've added your Lathe Milling Head to our Lathe Accessories category,
as well as to your builder page: Metaler's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-lathe-milling-head"> <img src="https://www.homemadetools.net/uploads/237545/homemade-lathe-milling-head.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-lathe-milling-head">Lathe Milling Head</a> <span> by <a href="http://www.homemadetools.net/builder/Metaler">Metaler</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/milling'>milling</a>, <a href='http://www.homemadetools.net/tag/lathe'>lathe</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->