Spray booth made from an old Dot-Matrix printer box.
I got this old Dot-Matrix printer box from my FIL. The clear plexi lid hinges up out of the way nicely.
http://images22.fotki.com/v815/photo...e07_B42-vi.jpg
I repurposed an old range vent fan motor and cage to draw out the fumes. The problem was adapting the old vent to a 4" flexihose to get the fumes out of the shop.
http://images12.fotki.com/v517/photo...MVC014F-vi.jpg
1st step was cutting a close-out panel out of some sheet aluminum and screwing that to the vent.
The adapter I built out of heavy cardboard I scavenged from a Kodak film box. Bent and cut to fit and glued and riveted together, it serves the purpose well.
http://images22.fotki.com/v519/photo...MVC003F-vi.jpg
The vent draws fresh air from the grille on the left side of the box.
http://images22.fotki.com/v518/photo...blowin2-vi.jpg
I used old wire speaker grilles with a couple of layers of medium ScotchBrite cut to fit the hole and pressed in as a "filter".
The booth works great and keeps 95% of the fumes and overspray out of the shop. :)
Mark