Printable View
Busy putting in ceilings all by myself.
Needed to support some 3.6m planks while culling to length with the chop saw.
Ladder steps was just too high or just too low. So added support on the other side at the correct height.
Attachment 26932
Attachment 26933
Will cut to length and rivet in place once ceilings are completed as I will use this surely again. :clapping:
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks garage nut! We've added your Long Plank Cutting Support to our Woodworking category,
as well as to your builder page: garage nut's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-long-plank-cutting-support"> <img src="/uploads/219544/homemade-long-plank-cutting-support.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-long-plank-cutting-support">Long Plank Cutting Support</a> <span> by <a href="http://www.homemadetools.net/builder/garage+nut">garage nut</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/cutting'>cutting</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
As someone who mostly works single handed or alone I truly appreciate your posts on solo work. Keep it up.
Eric
At least that way :-
1) You can blame nobody else if something goes wrong,
2) You can take a break when ever you want to,
3) Tools are treated with respect,
4) Tools are never misplaced,
5) Only you know about the mistakes,
6) I can still think of a whole lot of GOOD things if one works alone.
:lol:
No disagreements over music
Put in 8 hrs, never late for work
Screws, clamps, dead men, jacks, straps, pullers, ECT, have never talked back, wined about holding a board too long or scared of hights
On and on as you say. :D
