Free 50 Best Homemade Tools eBook:  
Remove advertisements
Results 1 to 7 of 7

Thread: Taper setup with a boring head

  1. #1
    Christophe Mineau's Avatar
    Join Date
    Jul 2014
    Location
    France, Brittany !
    Posts
    671
    Thanks
    398
    Thanked 933 Times in 367 Posts

    Christophe Mineau's Tools

    Taper setup with a boring head

    I think it is Marv who is the precursor of this method for turning tapers on the lathe using a boring head in the tailstock.
    Many thanks to him for this clever idea !

    I wanted to give it a try in order to turn some taper mandrels that I needed, and I decided to make some accessories to it :

    A small live center with cylindrical shank that will fit the boring head :




    It's made of a stack of a bearing stop and a couple of ball bearings



    A pair of spherical centers, re-using the ball tool I already showed yesterday.



    And also a couple of Lathe Dogs, two different diameters :




    And here is the complete setup :
    Turning a reference cylinder :

    Offsetting :

    Turning the taper :

    And finally a shearing tool showed here to finish the cone. (This tool is really wonderfull !)
    Cheers !
    Christophe
    ________________________________________________________________
    Visit my Website : http://www.labellenote.fr/
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  2. The Following 6 Users Say Thank You to Christophe Mineau For This Useful Post:

    Jon (03-20-2018), LMMasterMariner (03-26-2018), Metallurg33 (03-24-2018), PJs (03-20-2018), Seedtick (03-20-2018), Toolmaker51 (03-20-2018)

  3. #2

    Join Date
    May 2016
    Posts
    11
    Thanks
    0
    Thanked 21 Times in 5 Posts

    charles scozzari's Tools
    Great work and idea. Gathering parts right now for my own attachment, thanks to your idea, hope you don't mind my using your idea.

  4. The Following User Says Thank You to charles scozzari For This Useful Post:

    Christophe Mineau (03-21-2018)

  5. #3
    thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    339
    Thanks
    335
    Thanked 711 Times in 197 Posts

    thehomeengineer's Tools
    What a great idea.
    With simple maths knowing the length of bar and taper required the offset is simple to calculate. I guess the only thing is to ensure the boring head movement is in the same plan/true to the lathe bed otherwise when adjusting the required offset a compound angle occurs and will hinder the accuracy of using the boring head to set the taper.
    This method is certainly a lot cheaper than buying a commercially made taper turning attachment even if you bought all the items new you would be nowhere near the cost and for most we don’t often need to cut long tapers?
    Thank you for sharing
    The Home Engineer

  6. The Following User Says Thank You to thehomeengineer For This Useful Post:

    Christophe Mineau (03-21-2018)

  7. #4
    Ralphxyz's Avatar
    Join Date
    Dec 2016
    Posts
    306
    Thanks
    0
    Thanked 56 Times in 46 Posts

    Ralphxyz's Tools
    Nice, thanks for posting.

    Ralph

  8. The Following User Says Thank You to Ralphxyz For This Useful Post:

    Christophe Mineau (03-21-2018)

  9. #5
    Christophe Mineau's Avatar
    Join Date
    Jul 2014
    Location
    France, Brittany !
    Posts
    671
    Thanks
    398
    Thanked 933 Times in 367 Posts

    Christophe Mineau's Tools
    Quote Originally Posted by charles scozzari View Post
    Great work and idea. Gathering parts right now for my own attachment, thanks to your idea, hope you don't mind my using your idea.
    Hi folks,
    Thank you for the kind words, but again, the actual paternity of the original and genius idea of using a boring head in that context is to be attributed to our friend Marv Klotz (mklotz), and I got this idea from an old post from 2010 on another forum , and that post was already attributing the idea to "our" Marv, famous man already.

    I can just claim for the paternity of the different accessories that go with it in this post
    Cheers !
    Christophe
    ________________________________________________________________
    Visit my Website : http://www.labellenote.fr/
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  10. The Following User Says Thank You to Christophe Mineau For This Useful Post:

    PJs (03-21-2018)

  11. #6
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,084
    Thanks
    323
    Thanked 621 Times in 562 Posts


    Thanks Christophe Mineau! We've added your Lathe Dogs to our Lathe Accessories category,
    as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:




  12. The Following User Says Thank You to DIYer For This Useful Post:

    Christophe Mineau (03-26-2018)

  13. #7
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,084
    Thanks
    323
    Thanked 621 Times in 562 Posts


    Thanks Christophe Mineau! We've added your Live Center to our Machining category,
    as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:





    Post your reply!
    Join 33,912 of us and get our 50 Must Read Homemade Tools eBook free.



    50 Must Read Homemade Tools

  14. The Following User Says Thank You to DIYer For This Useful Post:

    Christophe Mineau (03-26-2018)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •