Free 173 Best Homemade Tools eBook:  
Remove advertisements
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Tile leveling clips - GIF

  1. #1
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    13,027
    Thanks
    2,482
    Thanked 4,370 Times in 1,714 Posts

    Tile leveling clips - GIF

    Tile leveling clips.



    Previously:

    Space shuttle thermal tile - GIF and video
    Traditional tile manufacturing by hand - GIF
    Tiled access panel - GIF

  2. The Following 5 Users Say Thank You to Jon For This Useful Post:

    Andyt (09-21-2018), olderdan (09-20-2018), PJs (09-24-2018), rlm98253 (09-20-2018), Seedtick (09-20-2018)

  3. #2
    olderdan's Avatar
    Join Date
    Jun 2016
    Location
    Devon UK
    Posts
    404
    Thanks
    876
    Thanked 752 Times in 263 Posts

    olderdan's Tools
    O Boy I could have used those a few times in the past, with floor tiles getting bigger and bigger these days less that a perfect base is a real problem. Certainly beats the tread boards I used to use.

  4. #3

    Join Date
    Oct 2016
    Posts
    44
    Thanks
    9
    Thanked 26 Times in 11 Posts
    Lash clips, such as those shown here, have the major problem that they tend to lift tiles up to level them which creates voids under tiles, leading to a much shorter life for the floor.

  5. The Following 4 Users Say Thank You to Drew1966 For This Useful Post:

    Andyt (09-21-2018), IAMSatisfied (09-21-2018), Jon (09-20-2018), TSiArt (09-24-2018)

  6. #4
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    13,027
    Thanks
    2,482
    Thanked 4,370 Times in 1,714 Posts
    Is there a way to use them so the lifting action is minimized? Also, it looks like there's a piece of plastic left embedded in the mortar; do those cause ghosting?

  7. #5

    Join Date
    Oct 2016
    Posts
    44
    Thanks
    9
    Thanked 26 Times in 11 Posts
    Quote Originally Posted by Jon View Post
    Is there a way to use them so the lifting action is minimized? Also, it looks like there's a piece of plastic left embedded in the mortar; do those cause ghosting?
    I have tried them before many times and the only way I have ever found to not have tiles lifting is to not use lash clips. As to the remaining plastic foot, if you grout them correctly, the client won’t know they are there as only the foot remains.
    Like most jobs, do it properly or pay a skilled professional.

  8. The Following User Says Thank You to Drew1966 For This Useful Post:

    PJs (09-24-2018)

  9. #6

    Join Date
    Oct 2016
    Posts
    44
    Thanks
    9
    Thanked 26 Times in 11 Posts
    If the surface to be tiled is prepared correctly in the first place (liquid leveller comes to mind) and the adhesive spread evenly, then your tiles should look a million bucks.

  10. #7

    Join Date
    Mar 2018
    Posts
    64
    Thanks
    0
    Thanked 61 Times in 25 Posts

    Rorschach's Tools
    Strikes me as a bad idea, voids and extra thick bedding compound sounds like a recipe for cracked tiles.

  11. #8

    Join Date
    Oct 2016
    Posts
    44
    Thanks
    9
    Thanked 26 Times in 11 Posts
    Quote Originally Posted by Rorschach View Post
    Strikes me as a bad idea, voids and extra thick bedding compound sounds like a recipe for cracked tiles.
    Exactly. There are people who claim to be able to use lash clips properly but when you check the work afterward, there are always voids.

  12. #9
    Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    2,611
    Thanks
    469
    Thanked 2,304 Times in 1,136 Posts

    Frank S's Tools
    My house has an addition to it and part of the kitchen floor is slab part is beam with wood decking I put down a double layer of cement backer board to help stiffen and level out the floor prior to laying the tile. TO do this I first stripped the floor to the decking and concrete poured construction adhesive over the entire floor as I laid the 1x2 meter backer board then over the wood portion screwed it down on a 20 cm x 20 cm pattern.Then spread adhesive over that for the 2nd layer of backer board, then the tile adhesive and the tiles which were 1/4 meter sq. It didn't come out perfect but good enough for a 50 year old house. I would have preferred to use 200 mm sq or smaller tiles, but the guy doesn't always get to choose the color texture or size.
    Now she thinks she wants tile chips for the bathroom walls OUCH! I have been balking on that for 2 years now.
    Never try to tell me it can't be done
    When I have to paint I use http://kbs.justoldtrucks.com/

  13. #10
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    13,027
    Thanks
    2,482
    Thanked 4,370 Times in 1,714 Posts
    Interesting. I did something similar for our hearth. Under the tile, I used two layers of cement backer board with expanded metal sheet between them, to act as a shock absorber.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •