When making straight cuts ,I use a 1" r:confused::confused:ound bar and use this roller guide. It holds the torch against the bar and at the right cutting height. The roller reduces drag.
Printable View
When making straight cuts ,I use a 1" r:confused::confused:ound bar and use this roller guide. It holds the torch against the bar and at the right cutting height. The roller reduces drag.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks oldtimer! We've added your Cutting Torch Guide to our Cutting Torches category,
as well as to your builder page: oldtimer's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-cutting-torch-guide-4"> <img src="/uploads/201530/homemade-cutting-torch-guide-4.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-cutting-torch-guide-4">Cutting Torch Guide</a> <span> by <a href="http://www.homemadetools.net/builder/oldtimer">oldtimer</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/cutting-torch'>cutting torch</a>, <a href='http://www.homemadetools.net/tag/guide'>guide</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Very simple and useful, Thanks
Nice! What are your thoughts about using a lighter tube? I was thinking of making it lighter but was wondering if the heavier bar weight is an advantage?
Very clever and nice work!
I have had problems with lighter material getting warped from the heat.Quote:
Originally Posted by Saltfever
Good point.
Thanks old timer.