Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 6 of 6

Thread: Trailer axle lock pin clevis

  1. #1
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools

    Trailer axle lock pin clevis

    My bud traded off one of the trailers I had rebuilt a few years ago for a 2009 Aluminum stepdeck.
    Trailer axle lock pin clevis-20171117_103823.jpgtr.jpg
    He stopped by today to show me what we now had, upon crawling under it I told him there were a couple issues that needed tending before he leaves
    2 of the lock pins were in bad shape and someone had actually tried dirt dauber welding them to make them work.
    Trailer axle lock pin clevis-20171117_115840.jpgtr.jpg
    I first wrapped all of the air lines with a few of my pipe marker wraps to protect them from sparks. THe thing about the nylon DOT airbrake lines is if under pressure the least little spark will damage them without pressure in them they are a little less prone to getting a hole melted in them.
    Trailer axle lock pin clevis-20171117_133012.jpgtr.jpg
    close up of the clevice
    Trailer axle lock pin clevis-20171117_133012.jpgtrr.jpg
    I ground off the bad parts
    Trailer axle lock pin clevis-20171117_134142.jpgtr.jpg
    Then I made new clevises from 1/4 by 1" flat bar clamped to my 1" thick steel table
    Trailer axle lock pin clevis-20171117_134557.jpgtr.jpg
    First bend
    Trailer axle lock pin clevis-20171117_134742.jpgtr.jpg
    After making the first bend I turned the bar over placed it on top o fa strip of 1/2" thick bar so it would have support for the second bend
    I placed a 1/4" thick strip on top to serve as the clevis separation spacer
    Trailer axle lock pin clevis-20171117_135044.jpgtr.jpg
    then made the final fold
    Trailer axle lock pin clevis-20171117_135203.jpgtr.jpg
    Hole positioning is not extremely critical this is close enough
    Trailer axle lock pin clevis-20171117_135330.jpgtr.jpg
    After the hole was drilled I sawed off the clevis then rounded the edges
    Trailer axle lock pin clevis-20171117_140519.jpgtr.jpg
    The holes in the link bars were in bad shape from being welded on so I slightly reamed the oversize then cut bushings out of 1/2" 304 SS .035" wall
    Trailer axle lock pin clevis-20171117_153908.jpgtr.jpg
    Then welded the clevises to the lock pins and used 2" grade 8 bolts with long enough shoulders to reach through the clevis
    the bushings are .270" long and the link bars are .250" thick this allowed me to tighten the bolts using gr( nylock nuts as well
    Should last longer than the garbage the factory used I would have liked to have reamed the link bars out enough to press fit a bronze bushing in for the SS bushing to pivot on but sine they will probably only be used one every few weeks the cost could not be justified
    Trailer axle lock pin clevis-20171117_184324.jpgtr.jpg
    Trailer axle lock pin clevis-20171117_184339.jpgtr.jpg

    186 More Best Homemade Tools eBook
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  2. The Following 4 Users Say Thank You to Frank S For This Useful Post:

    GerhardTDISERV (May 9, 2020), LMMasterMariner (Nov 22, 2017), NortonDommi (Nov 21, 2017), Seedtick (Nov 18, 2017)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks Frank S! We've added your Trailer Axle Clevis to our Trailers and Towing category,
    as well as to your builder page: Frank S's Homemade Tools. Your receipt:




    2000 Tool Plans

  4. #3
    Supporting Member Toolmaker51's Avatar
    Join Date
    Feb 2016
    Location
    Midwest USA
    Posts
    5,330
    Thanks
    7,041
    Thanked 2,977 Times in 1,892 Posts

    Toolmaker51's Tools
    Dirt Dauber Welding, is that a company name, or a level of expertise lower than Popcorn Welding?
    Old shop I knew, full of "fixer's and smithy's" also had a Bubble Gum category... Stuck on, but no penetration, lol.
    Sincerely,
    Toolmaker51
    ...we'll learn more by wandering than searching...

  5. The Following User Says Thank You to Toolmaker51 For This Useful Post:

    Scotsman Hosie (Apr 1, 2019)

  6. #4
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools
    Dirt dauber is just 1 step above booger snot
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  7. The Following 2 Users Say Thank You to Frank S For This Useful Post:

    Paul Jones (Nov 22, 2017), Scotsman Hosie (Apr 1, 2019)

  8. #5
    Supporting Member NortonDommi's Avatar
    Join Date
    Jul 2014
    Location
    North Island, New Zealand.
    Posts
    990
    Thanks
    1,800
    Thanked 524 Times in 315 Posts

    NortonDommi's Tools
    About the same as birds**t welding then?

  9. #6
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools
    Quote Originally Posted by NortonDommi View Post
    About the same as birds**t welding then?
    Pretty much. The thing that got me was not so much the welding but the fact that someone would actually think to do it. I mean if all they were trying to accomplish was to get the locks to release so they could slide the axle the "S" hook of a tarp strap would have sufficed or how hard would it have been to just put in a 3/8" bolt and nut since the pin was missing, but to tack weld 2 parts together when one of them must articulate through about 30° of motion at the pivot REALLY?
    Let's forget that at the factory when the trailer was made they used cheap galvanized rod ends welded to the pins in the first place was ludicrous enough. the clevis pins in those things have the hardness and durability lower than a bubble pack grade 2 bolt you might buy at a convenience store and held in place with a 1/16" cotter pin
    Rant over, I'm glad my bud decided spread the axles while he was at my place instead of after he had a load on it and then needed to spread them, because it gave me a chance to inspect the underside for cracks and other possible things that may need tending sooner or later. Like the bad air bag that was virtually at the point of rupturing and already had a small air leak in it We replaced it but bought 2 so we could change out both on the same axle, and the next time he passes through we will probably change out the ones on the other axle just so every thing will be matching age they are not cheap at $250.00 each but neither is being put out of service on the side of the road



    186 More Best Homemade Tools eBook
    Last edited by Frank S; Nov 22, 2017 at 01:38 AM.
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  10. The Following 2 Users Say Thank You to Frank S For This Useful Post:

    NortonDommi (Nov 22, 2017), Scotsman Hosie (Apr 1, 2019)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •