Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 4 of 4

Thread: Tripod quick release

  1. #1
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,433
    Thanks
    357
    Thanked 6,378 Times in 2,116 Posts

    mklotz's Tools

    Tripod quick release

    Ok, this isn't a tool for making stuff but photography plays a large part in what we do here so, without further apology...

    If you've ever used a tripod with your camera, you may have found, as I do, that attaching the camera to that dinky little 1/4-20 captive screw in the tripod head can be a real test of patience. Moreover, juggling a bulky camera and an awkwardly shaped tripod can, if you're not very careful, lead to expensive mishaps. It's even more annoying if your shooting involves a mixture of hand-held and tripod-held shots requiring frequent mounting and dismounting of the camera.

    The pros solve this problem with a tripod quick release. Commercial versions can be quite expensive for an item that isn't going to see constant use.

    But we're machinists so we should be able to make such a device in an afternoon.




    This picture shows the component parts. Top left is the clamp assembly that attaches to the tripod. To its right is the screw and knob that clamps the two dovetailed arms together. At lower left is the dovetailed foot that attaches to the camera with the 1/4=20 screw at lower right.




    This picture shows the quick release clamp assembled and attached to the tripod using the screw that would normally attach the camera.




    And here is the foot attached to the camera with the 1/4-20 screw. (I used my pocket camera so that the camera wouldn't interfere with the photos. Normally I would have the foot on one of my larger cameras.)




    Finally, the camera is mounted to the clamp. The foot slides into the dovetails in the clamp and a quarter turn of the locking knob locks everything up tightly enough to support even a heavy camera.

    There's nothing sacred about my design. Feel free to add your own nuances. However, the foot should be smallish since you'll want it to stay on the camera more or less permanently and its design should be simple so that you can make one for each of your cameras. The screw that secures the foot should be countersunk/bored into the foot so it doesn't provide a pivot point when the camera is set down on a flat surface.

    186 More Best Homemade Tools eBook
    Last edited by mklotz; Jul 11, 2017 at 08:53 AM.
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  2. The Following 5 Users Say Thank You to mklotz For This Useful Post:

    jere (Sep 2, 2015), kbalch (Sep 2, 2015), LaVern (May 11, 2017), philipUsesWood&Brass (Jun 18, 2018), rendoman (May 11, 2017)

  3. #2
    kbalch's Avatar
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 531 Times in 383 Posts
    Thanks mklotz! Very nice, indeed. Now we need a clone of the RRS BH-55 ball head!

    I've added your Tripod Quick-Release to our Photography and Videography category, as well as to your builder page: mklotz's Homemade Tools. Your receipt:


    2000 Tool Plans

  4. #3
    Supporting Member jere's Avatar
    Join Date
    Feb 2015
    Posts
    200
    Thanks
    183
    Thanked 117 Times in 69 Posts

    jere's Tools
    very slick design! I can think of a few non camera mounts that could use this idea too.

  5. #4
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts
    Wow, that's pretty slick! I have the commercial quick releases you're talking about, but I want one of those!



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •