if you have a cnc mill to do it...I sure couldent do it by hand..but it sure looks great to mee. I suppose you could also use door hindges to do it.. I give it 3 thumbs up!!!
Printable View
if you have a cnc mill to do it...I sure couldent do it by hand..but it sure looks great to mee. I suppose you could also use door hindges to do it.. I give it 3 thumbs up!!!
unless there all pretty darn close it's gonna be kinda wonkey,some loaded more than others, some pushing some pushing.yes a "loose" version could be done kinda eazely, but....oh never mind. I reckon a set up jig could be made and persise mesurements&location and stops it wouldent be that bad. but for me....I would have to do it a tad different.like...make a bigger shop...add a elevator/lift..or ladder like attic ladder juts a bit more beefy. or possiably 2 aluminum ladders with some links&steps to fold up. I do like this one hear,I wonder who make them or how much $$ they are.probably made is switzerland....and expensive.but dam good quality.
Upon further thought, that folding stair would take up a lot of valuable wall space in a shop. I think a swing down stairway would work better for me.
34-second video:
https://www.youtube.com/watch?v=umfvm8I9_oU
It is cool how the door sections fold away from the wall toward the camera. Not so sure OSHA would approve them for a fire exit ;-)
It's footprint is a bit scarey, eye height, for some I know when it is folding into the room but I like the whole concept. Pretty cool.
Some good finger crush points in that mechanism