I am always needing to drill and mill small 1/8" to 3/8" shafts. I made the block out of a piece of 3.5" X 7.5" X 1" aluminum. The holes are 1/4-20. The V was milled with a 90° chamfer mill. The toe-clamps are here.
I am always needing to drill and mill small 1/8" to 3/8" shafts. I made the block out of a piece of 3.5" X 7.5" X 1" aluminum. The holes are 1/4-20. The V was milled with a 90° chamfer mill. The toe-clamps are here.
Thanks again Harvey Melvin Richards! This one's been added to our Machining, Metalworking, and Workholding categories, and of course to your homemade tools page: Harvey Melvin Richards's Homemade Tools. Your receipt:
HomemadeTools.net founder (2012) and CEO
Join thousands of us, and start building your own tools today.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks