Woodturning small size round skew

[Christophe Mineau]

Here is another tool I made for woodturning, starting from the same HSS 6mm diameter round rod (from a machining store).

Here it is brazed at the end of a soft steel rod, inserted in a woodturning handle.

The HSS tip is grounded with two faces, at an angle.
This kind of little skew is very handy to turn little beads for instance and little pieces like pens.







Using this kind of HSS tips is saving a lot a money compared to a full solid HSS tool, for which only a little part really needs to be hard.

Thanks for reading.
Christophe
PS, on my site, it can be seen with other turning tools here :
La Belle Note - Photos - Woodturning : My tools

[kbalch]

Thanks Christophe! I've added your Woodturning Skew to our Metalworking category, as well as to your builder page: Christophe Mineau's Homemade Tools. Your receipt:

Woodturning Skew by Christophe Mineau

tags: handle, grinding, hand tools, turning, brazing