Homemade Rotary Table Centering Fixture
BUILDER:
Roger Monroe on sherline.com
DESCRIPTION:
Homemade rotary table centering fixture comprised of a steel pin machined to fit an end mill holder on one end and the rotary table center hole on the other.
RATING:
(1)
May 29, 2022 1:35 AM
Anonymous
Set a 1” ball bearing in the center of the rotary table. With rotary table still loose one mill bring the spindle down. Centers it right up.
Rate this build:
CATEGORIES:
TAGS:
LEVEL OF DETAIL (1-5):
2
FILES:
Newest Forum Posts
- Right angle drill attachment - GIF by Altair on 2024-04-25 10:27:01
- Epoxy concrete - video by Elizabeth Greene on 2024-04-25 10:17:15
- Scrap bin scribe by NeiljohnUK on 2024-04-25 10:09:20
- Chamber Headspace Gage by hemmjo on 2024-04-25 10:08:11
- Bagging camping blankets - GIF by IntheGroove on 2024-04-25 09:34:49
- Manufacturing PVC pipes - GIF by Altair on 2024-04-25 06:07:02
- Circuit Board Drill Templates by DIYer on 2024-04-25 04:25:17
- Dovetails with a bandsaw (2 jigs, a dovetail marker and a fixture...full free plans) by DIYer on 2024-04-25 04:22:10
- Wood joint selection guide - image by Bony on 2024-04-25 01:47:30
- Robbie Knievel's back X-ray and spine brace - photo by desbromilow on 2024-04-24 22:51:18
DIY Rotary Table Centering Fixture - comment on how to build a Rotary Table Centering Fixture - 1 comments
Anonymous says:
May 29, 2022 1:35 AM
Set a 1” ball bearing in the center of the rotary table. With rotary table still loose one mill bring the spindle down. Centers it right up.
Related Homemade Tools:
Signup for our newsletter and get the 186 More Best Homemade Tools eBook free!
- BuildThreads Network:
- HomeMadeTools.net
- BikeBuilds.net
- FordBuilds.net
- ChevyBuilds.net
- 4x4Builds.net
- BoatBuilds.net
- PlaneBuilds.net
- CabinBuilds.net
- GarageBuilds.net
- MuscleCarBuilds.net
- HotRodBuilds.net
- GMBuilds.net
- TruckBuilds.net