Printable View
This video takes a closer look at whether it’s possible, or even sensible, to incorporate a pull-down feature into the fixed jaw of a vise or fixture, and whether such an idea actually works in practice. Of course, the key requirement here is that the reference position must stay exactly where we told it to stay, ideally without wandering off the moment we apply the pull-down.
https://youtu.be/hruI1L-2H4E?si=8O826faUoRNt38-K
Congratulations Mook - your Fixed Vise Jaw Pull-Down method is the Tool Tip of the Month for July 2025!
Very interesting concept, in a month filled with good Tool Tip posts.
Some more good tool tips from July:
Keying and Tramming Vises for a Milling Machine by The Outback Shed
Lathe Jaw Magnet Method by Floradawg
Lathe Ball Turning by Make Things
Tandem Milling Method by Mook
Riving Knife Risks by Make Things
Granite Drilling Method by tonyfoale
Regulating Air Cylinder Force by GBWM
Shop Electrical Safety by Make Things
Improvised Tachometer by mklotz
Stock Breaking Down Jig by Make Things
Acrylic in Jigs by Make Things
To enter your tool tip in our monthly contest, just post it here in the Tool Tips and Tricks subforum.
Mook - we've added your Tool Tip to our All Tool Tips of the Month winners post.
You've also won our 3-time tool tip award, now visible in the awards showcase in your postbit, beneath your username:
https://www.homemadetools.net/forum/...fTheMonth3.pnghttps://www.homemadetools.net/forum/...MonthIcon3.png
And, you'll be receiving a $100 prize, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and prize choice and I'll get it sent over right away.
Congrats again :thumbsup:
Congrats Mook!